iaresee
Well-Known Member
I have an IA assigned to bypass/engage Plex Delay 1. In a factory AFIII preset with a Plex Delay 1 instance ('59 Bassguy) in it, it'll flash on and then immediately turn off. There's no noticable change to the bypass state of the Plex Delay 1 instance on the AFIII when this happens.
If I toggle the state of the Plex Delay #1 from the AFIII the switch state changes and stays changed on the GT/22.
No other IAs are mis-behaving like this one.
There is definitely nothing else connected to this block on the AFIII that might be interfering with the GT/22's ability to control it.
Not sure what it could be.
Edit: AFIII is running 16.00b2 -- I'll try updating to 17.00 now.
Switch settings are:
If I toggle the state of the Plex Delay #1 from the AFIII the switch state changes and stays changed on the GT/22.
No other IAs are mis-behaving like this one.
There is definitely nothing else connected to this block on the AFIII that might be interfering with the GT/22's ability to control it.
Not sure what it could be.
Edit: AFIII is running 16.00b2 -- I'll try updating to 17.00 now.
Switch settings are:
Last edited: