Firmware & editor version 5.1.0 are now available!
FEATURES:
TO UPDATE FIRMWARE:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the two buttons under the main screen.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: https://www.rjmmusic.com/downloads/MMGT/MMGT510.zip
Mac Editor: https://www.rjmmusic.com/downloads/MMGT/MMGTEditor-5.1.0.dmg
PC Editor: https://www.rjmmusic.com/downloads/MMGT/MMGTEditor-5.1.0.zip
Manual: https://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.3.pdf
FEATURES:
- New device support:
- Amplitube Tonex
- Chase Bliss Mood 2 & Gen Loss 2
- Flower Sunflower
- Strymon Brig, Cloudburst and Ultraviolet
- Added new Bank Size parameter, which allows you to set a fixed bank size. This is the amount of presets the Bank Up and Bank Down advance through the preset list. (This has no effect in Song & Setlist mode.) The default value "Auto" is the old behavior, where bank size is determined by the number of preset buttons on the current page.
- IA Cycle Menu and Scene Menus now have a "Remain in Menu" option that allows you to switch between any or all of the options in the menu without exiting the menu. A Done button is provided to exit the menu when this option is activated.
- Corrected the default settings for the Axe-Fx III looper button
- Improved the way log taper compensation works in expression pedals
- Fixed issues in the System Menu on GT/10s
TO UPDATE FIRMWARE:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the two buttons under the main screen.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: https://www.rjmmusic.com/downloads/MMGT/MMGT510.zip
Mac Editor: https://www.rjmmusic.com/downloads/MMGT/MMGTEditor-5.1.0.dmg
PC Editor: https://www.rjmmusic.com/downloads/MMGT/MMGTEditor-5.1.0.zip
Manual: https://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.3.pdf
Last edited: