Recent content by confusedrackman

  1. C

    Please help

    Issue #1 - SOLVED! I moved the cables to the send jacks and I can now mute the channels. Thanks! Issue #2 - PART SOLVED. I removed the cable as you instructed and can get signal when the loop is activated. Thus, it is not the RJM loop. If I put the insert cable back in it still mutes the...
  2. C

    Please help

    I hooked it up following that advice. I have a YRS out from 10 split into two ts cables that feed one side into loop 11 and one side into loop 12. I am experiencing a couple issues. First, I can't mute channels 11/12. I turn on the channels on the gizmo and there is no change. I would like to...
  3. C

    Please help

    Awesome. Thank you. I'll give it a try and let you know! Thanks Ron.
  4. C

    Please help

    I put the TRS jumpers in there as you suggested. I am now getting sound (yay!), but only on one channel of my power amp for some reason. Any ideas?
  5. C

    Please help

    I do not have any jumpers there. I'll add them and report back.
  6. C

    Please help

    Schematic is attached.
  7. C

    Please help

    After many years of not playing, I am getting back into it. I had a fairly complex rig I tore down to get in one 8 space rack. I have been hooking things up in a similar fashion, but I am not getting any sound for some reason. I am running a stereo setup. 8 stompboxes, Engl preamp, strymon...
  8. C

    Betcha Can't Solve This One! Schematic Included! UPDATED!!!!

    Re: Betcha Can't Solve This One! Schematic Included! UPDATED Brilliant! Thanks! Does this mean that I will ALSO need a mono-to-dual mono cable to split the signal out of the tone saver to feed into loop 9? I assume I would need this so that my delay will be fed a stereo signal to feed both...
  9. C

    Betcha Can't Solve This One! Schematic Included! UPDATED!!!!

    Re: Betcha Can't Solve This One! New Schematic. UPDATED! UPDATE!!!!!!!! PLEASE HELP!!!! I moved a few things around and made this schematic based on your recommendations, Ron. In a nutshell, I run all my stompbox fx in mono before my preamp. Then, that preamp feeds a mono output signal...
  10. C

    Mini Mixer in Effects Loop W/O Switcher

    I'm interested in using the mini mixer with my effects loop of my mono amp without using a switcher. How would I set it up? I assume I would use a Y cable coming out of the 'send' of my amp. Then, one end of the Y cable would go into the 'dry' input of the mixer. Next, the other end of the Y...
  11. C

    Betcha Can't Solve This One! Schematic Included! UPDATED!!!!

    Re: Betcha Can't Solve This One! Schematic Included! Ah, this is why I will always be a RJM fan and user. You come up with some genius solutions, Ron. Thanks for your help!!!! Obviously, the first option is the easiest. I didn't know that you could program a loop to always be on (believe...
  12. C

    Betcha Can't Solve This One! Schematic Included! UPDATED!!!!

    Re: Betcha Can't Solve This One! Schematic Included! Okay. Changed my mind on something. Any idea on how I would take the looper out of the RJM Loop 10 and still keep it with the mini mixer in parallel to my dry signal and other effects? I don't like having to turn on/off a loop to be able...
  13. C

    Betcha Can't Solve This One! Schematic Included! UPDATED!!!!

    Re: Betcha Can't Solve This One! Schematic Included! Well, something isn't quite right. I hooked it up exactly as the schematic. In my looper/mixer interface, I get signals in both L&R inputs if I have the delay pedal on. If the delay pedal is off, I only get signal on one side (L) in the...
  14. C

    Betcha Can't Solve This One! Schematic Included! UPDATED!!!!

    Re: Betcha Can't Solve This One! Schematic Included! THANK YOU!!!! I had it hooked up that way and couldn't figure out why my delay was only coming out of one cabinet. DOH!!!!! Here is my updated schematic. How does it look? I think I got it correct, based on your recommendation...
  15. C

    Help With Loop Effects - Gizmo and Preamp/Poweramp

    I gave up and decided to go another route (see other thread): viewtopic.php?f=7&t=718
Back
Top