I have a mini effects gizmo running with the g-system. I have also redfined buttons on the g- system controller to turn loops on and off. I am also using a mini amp gizmo. Using these with the g- system controller is a lot like using an rg-16 with a ground control pro as you demonstrate in your...
Hi Martin,
That is an excellent idea. Your idea pointed the way to an easier solution. If I want the MX-200 alone, I will have the Mastermind send a midi cc to engage the tuner mute function on the G-major. With both loops on, the dry will be muted by the plug in loop 10, and the audio from the...
Hi,
I spent some more time with the rack trying all the combinations, and getting one combination, MX-200 (without dry signal), seems to not be possible. Again, I am using Fig. 2 with the plug removed from the return of loop 9. Here are loop states corresponding to each combination:
Dry-loops...
I added the mini line mixer to my rack, and I could not be happier. The effects never sounded better, and I love all the switching option I have. The mini line mixer is sonically very transparent. All the effect come through crystal clear and parallel mixing the processors gives the effects...
I just thought I would post a couple of pictures of MEG10001 in her new home. I love the blue lights. It fits perfectly on the rack shelf with a mini amp gizmo, a few pedals and an EBTECH Hum eliminator. The hum eliminator is necessary because I am using the 3-1 split setup. The most import...
Hi Martin,
I know! I have a couple of low number boogies, but yhat is about it. You are going to love the MEG. I think it is a great pece of gear, and I hope it is a sucess for RJM. After I get it set up, i will report back.
Today I received my MEG. It is a thing of beauty. I can't believe how compact it is. I can't wait to put it in my triple rec rack. I noticed the serial number is MEG10001. Does this mean it was the first one off the production line? If it does, will treasure it even more. Anyway, i just wanted...
Hi Martin,
I forgot to add that I agree that G Major 2 colors the tone, even if it is a little bit. Far more problematic for me is that I don't think the effects sound as 3D or lush when using the Killdry feature. I don't know if TC builds the algorithms around having a percentage of dry signal...
Thank you so much, Ron. Those are exactly the combiations I am looking for, and with the signal split being parallel, everything will be fine.
Thanks again.
Ciro
Hi Martin,
Thanks for your reply. I should have been more precise with terms. I am not worried about tone degradation or tone loss. That is why I bought the effect Gizmo. When I want the best signal and I do not need effects, I let the Effects Gizmo take the processors out of the signal chain...
In my rack, I have a G-Major 2 plus a lexicon MX200. I want to use a mini line mixer so the output of the MX200 is not processed by the G Major 2. I have the diagram illustrating this setup, and I understand how it works. However, I want to do something slightly different. In the wiring diagram...
Hi,
OK, I measured the impedance of the M-Audio EXP expression pedal. It is 60K. The pedal also has a switch to shift the polarity, so you do not have to do any rewiring to get the connections to match those in the Mastermind manual. It also has a knob on the side that adjusts the impedance of...
I am using the 1.4 firmware. The volume pedal is the Ernie Ball junior, so I am assuming the impedance is 25k, the value of the pot. I cannot find any info on the m-audio exp. Could I measure the impedance with a multimeter set to ohms and rocking the pedal? I would be happy to do that. Also, I...
Hi,
I just wanted to pass along some information, in case it might be helpful to other users. I have a Timefactor and Modfactor. I am using an RJM Mastermind for midi control. I have been trying to assign to the CC assigned to the expression pedal to control a function in the Timefactor. I had...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.