I've just released the first bug fix release of the Mastermind firmware that supports the Mastermind LT. Version 3.1.4 has the following fixes:
PLEASE DON'T UPDATE TO THIS RELEASE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 3.0 or earlier, your PBC will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind PBC while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind PBC. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MM3110.zip
Mac Editor: http://www.rjmmusic.com/software/MastermindEditor-3.1.7.dmg
PC Editor: http://www.rjmmusic.com/software/MastermindEditor-3.1.7.zip
Manual: http://www.rjmmusic.com/manuals/Mastermind LT Manual-3.1.pdf
- Added the ability for the GT to estimate tempo BPM from the tempo flash messages sent by Axe-Fx and Kemper. This works well with the Axe-Fx, less so with Kemper (the flashes are not super accurate). You can turn off "Show Tempo" if you can't get the tempo value to settle down.
- Fixed Song/Setlist mode to only highlight the current preset button, even if the same preset appears multiple times in the song.
- Fixed bugs concerning setlist and song updates using the editor
- Added support for Kemper firmware 5.x. This won't work 100% correctly until Kemper releases firmware 5.1.0 (soon, they tell me!)
- Fixed a bug that made weird things happen when you have no preset buttons defined
- Fixed issues with switching between editing PBCs and LTs
- Fixed a crash when trying to edit Audio actions on the Mastermind LT
- Fixed a bug that prevented the local page from being selected in menus and other places.
- Fixed a problem that prevented a third press on a preset button from returning from global preset.
- Fixed a rounding error in tempo display
- Added a setting "Calculate tempo flash" which disables or enables the calculation of tempo from tap tempo flash messages sent by Axe-Fx and Kemper. This is off by default, you will need to turn it on to re-enable this feature. Until I update the editor, this can only be edited on the device itself. If you change the parameter and read it into the editor, the editor will preserve the setting, but it won't allow you to edit it.
- Tempo changes no longer interfere with bank select mode.
- Fixed a problem that happens when entering setup mode or sending settings to the device when the device is on the global preset.
- On Device PC button page, fixed default CC bypass values to match what Strymon pedals expect.
- Enabled the ability to send note messages on preset change
- Incorporated all applicable fixes and changes from the 3.1.5 firmware release
- Added Source Audio programmable EQ support
- Fixed several bugs involving copying presets and local button pages
- Fixed external switch editing on Presets tab
- Fixed a bug that prevented page names from being copied when swapping pages
- Fixed the Momentary Time setting, which was not saving
- Improved the ability of the editor to detect whether you have an LT or PBC connected
- Fixed a bug that made the "Do you want to save" dialog appear too often
- Fixed a bug that prevented the loop Trails setting from getting saved
- Fixed a bug that made preset buttons stay on when global preset is selected
- Fixed a bug that caused trouble when switching from a preset, to global preset, and back
- Changed on-board button page edit to show CC names when editing CC buttons
- Added support for Chase Bliss Brothers pedal
- Fixed a bug that affected Axe-Fx tuner display
- Editor: fixed copy and paste of external switches
- Fixed a bug that prevented external switches from working as preset buttons
- Fixed a bug that made the Preset - button not work correctly on songs with only one preset
- Fixed the special "same" tempo value - in a preset, BPM values of 1 or less means "keep the same tempo, don't change"
- Fixed a bug that prevented display updates caused by the expression pedal position switch
- Fixed a bug involving tap tempo on external switches
- Setlist actions now bring you to the first song and preset in the list
- Fixed a bug that can cause a lockup in certain cases
- Fixed a bug involving CC linked buttons that are also part of a group
PLEASE DON'T UPDATE TO THIS RELEASE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 3.0 or earlier, your PBC will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind PBC while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind PBC. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MM3110.zip
Mac Editor: http://www.rjmmusic.com/software/MastermindEditor-3.1.7.dmg
PC Editor: http://www.rjmmusic.com/software/MastermindEditor-3.1.7.zip
Manual: http://www.rjmmusic.com/manuals/Mastermind LT Manual-3.1.pdf
Last edited: