Search results

  1. Dallas

    Mission SP1-RJM for Fractal

    I have a Mission SP1-RJM. Will this work directly into Fractal units or do I need a custom cable? Thx
  2. Dallas

    Anyone integrated RJM with HX Stomp?

    Curious how your integrations are going with HX Stomp. Haven't seen any yet.
  3. Dallas

    Generic Device Video Tutorial

    +1
  4. Dallas

    What case is GT22 in on RJM homepage?

    Look up a guitarist named Tim Womble. It is his rig.
  5. Dallas

    [DONE] Line 6 HX Stomp Integration

    Buying an HX Stomp and would love it if the HX Stomp were fully integrated like the Helix is. Benefits to the user: obvious Benefits to RJM: -I cannot see the existing integration of a GT with Helix as a popular one. This would take advantage of the work you've already done (setting up Helix...
  6. Dallas

    MIDI Signal Chain & MEG vs Alternatives

    @rjmmusic On that note: again, I'm phantom powering the GT22. If I use a 7pin midi cable from GT22 to MEG on my board, will the MEG still be safely powered sufficiently and safely? I guess I don't want to mess anything up power-wise, or put too much strain on the initial power injector.
  7. Dallas

    MIDI Signal Chain & MEG vs Alternatives

    Thanks Ron, that's a good idea. Didn't even think about that. One of those cases where I didn't even realize the usefulness of the abundance of outs on the GT22. Looking forward to this!
  8. Dallas

    MIDI Signal Chain & MEG vs Alternatives

    Revisiting a hybrid setup, consisting of my Kemper, GT22 and pedals. I do currently use the RJM 5pin to 7pin Power Injector and would like to continue doing so. I own a Decibel Eleven Loop Expander that I got for a bargain in hopes of setting this up, but I found it confusing to program. Two...
  9. Dallas

    5 & 7 pin MIDI cable max length

    Appreciate the response, Ron!
  10. Dallas

    Alphabetic Sort

    +1
  11. Dallas

    5 & 7 pin MIDI cable max length

    Running GT22, Kemper and POWERED RJM 5 pin to 7 pin adaptor. Currently running a 40 foot 7 pin midi cable from BTPA which works flawlessly. I need more length. Crazy, I know. I need about 80-100 feet. If I continue to use the 5 to 7 pin powered adaptor, will a 100-ft 7 pin midi cable...
  12. Dallas

    Delay/Verb Spillover w/ Kemper

    Up until now, I've been using IA CC#26 (Delay) and IA CC#28 (Reverb) to turn on/off the Delay and Reverb blocks on Kemper. Works great, but I noticed that anytime I step on different preset, delay and reverb spillover does not occur. Naturally, I am going to try to change the above CC's to #27...
  13. Dallas

    Mission SP1-RJM Spring Load Inspiration

    So pumped to have just received a Mission SP1-RJM with Spring Load. Now I'm trying to figure out what to do with it, so I'm looking for suggestions. For reference, I am using a Mastermind GT with my Kemper. I usually have all Kemper fx blocks occupied with compression, overdrive, eq, delays...
  14. Dallas

    Preset button mutes signal, shows Tuner screen on Kemper

    It was a couple things. I'd preemptively set up an auxiliary switch, combined with the fact that I'd set the volume setting on the Kemper to Expression Pedal @ 0 = Tuner". Ron got back to me with the following and it worked like a charm! "Ok, the volume issue is the position switch on the...
  15. Dallas

    Preset button mutes signal, shows Tuner screen on Kemper

    All sorted out. Thanks so much for the help!
  16. Dallas

    Preset button mutes signal, shows Tuner screen on Kemper

    Running Mastermind GT with Kemper (Slave Mode) GT OS: 4.1.0 Release Kemper OS: 5.5.2 Release Upon booting up in Kemper Performance Mode, I can hear a guitar signal just fine. The second I step on an RJM preset button, I experience the following immediately: 1. Guitar signal goes silent 2...
  17. Dallas

    GT22 to test GT10 file?

    I wish to use the editor to create a file that I can send to my friend who owns a GT10. He doesn't have the time to do it, so I'm trying to do everything for him. I have a GT22 that I'd like to use to test that file. Is it possible to do this? Can a GT10 file be used on a GT22?
  18. Dallas

    Mute when accessing Kemper Tuner on GT

    How does a fella mute the signal when accessing the Kemper tuner on a MM GT? Not exactly sure what to program. Noob question, I know. EDIT: I forgot to say that I'd like to accomplish this without using an expression pedal for volume. I did some reading and searching in this forum and have...
  19. Dallas

    Purely Aesthetic - Uniform Text Size

    @dpeterson, are you Don Peterson on the Kemper forums?
Back
Top