Hi Ron,
I have a new M3 MacBook Pro and all seems fine. I've managed to read the settings from my GT22, save the config file to the MBP and also transfer a different file from the editor to the GT. No issues here. Connected up via a USB B to USB cable. Could it be the USB cable length?
Hi guys,
I hope you are all well. I'm just after some info on phantom powering the GT22. I have this setup in my Axe FX 3 rack already using the phantom power box etc. It all works great!
What I’d like to do is setup something similar and a little more compact still using the GT22 and using...
Hi Ron,
Thanks for the reply. I think it might be the Triaxis having the issue. Some of the functions like the program change menu isn't allowing me to map presets at all as I can't get in to the menu. The program change led is suppose to flash 4 times to get into edit mode but it doesn't. It...
Hi guys,
I hope you are all well. I managed to get myself and old V2 Triaxis a few weeks back and its been covered to 240v to work over here in the UK. Sound wise everything is working great, modes work, and the controls work etc. I'm having some issues programming with the GT and the Axe FX 3...
Definitely saves me sending it back and waiting for another one. I'm waiting on some cables and other bits to be made for my board so by the time that's all ready hopefully I'll have it all back up and running.
Hi Alexander,
I thought you'd like to know the outcome of what happened with this. It's as Ron said a hardware issue with my GT. Ron is sending me a replacement circuit board for the lower row of LCD's and that should solve the issue. I will post again when I receive the replacement board and...
I'll try that. It could also be a switch configuration setting as well. I found an article on the help section from the RJM website that deals with switches acting strangely. I'll try that later tonight when I get in from work.
And also a complete wipe of all settings using a USB drive I'll try...
It's possible I suppose. Very strange! I will wait to see what Ron says when he gets back to me. I've reached out to the reseller in Germany as well just in case, they were closet to me in the UK. I'll let you know what happens.
Thanks again for all your help.
Still the same I'm afraid. It's driving me mad lol. I'm assuming my small 5 pin midi cables don't have to wired a certain way? It's a normal config?
You don't think could be the Voes M Box? I'm wondering if I should've got the RJM phantom power box instead.
I did try that previously and even at factory settings even though its the effect gizmo selected as the main device you can see preset 6 is displayed instead of preset 1 on button 1. So I'm thinking this could be something else. It's definitely a weird one lol
Ok so I tried that again and there was no change. I've removed the send on preset change and update on preset change from the IA store button also. Is it worth me removing both the IA store button and IA mode button if they aren't being used?
Ok so a little progress, I am able to select scenes normally due to the group buttons now being set to none. But I'm still getting scene 6 appear on button 1 even though it's programmed for scene 1. It is switching to scene 1 though so its just the LCD displaying the wrong name.
Any suggestions?
Thanks Alexander, ungrouping the the scenes seems to have fixed the scene 7 issue I was having. I can now select that with no issues.
PC mapping is definitely off in the Axe, I'll do a system reset in the Axe and see what happens. Will report back in a bit.
Hi Alexander,
Thanks for the reply, I did show Ron my config file yesterday and he couldn't see anything. He suggested to try selecting the IA link option for all scenes. I did try that but it didn't work unfortunately. Config file is attached. I've attached a pic of the GT as it comes out of...
Hi guys,
I hope you are all well Happy 4th of July to you all. I'm back with the GT22 after a quite a few years I've missed it too much. I'm using it with my Axe FX 3 MKII and I'm having some scene issues on the GT. I'm in touch with Ron about this too via email but I thought I'd post on here...
Thanks for the quick reply Ron. I've checked my midi connections and all seems fine. I'm using your phantom power box to power the GT. Everything else seems to be ok switching scenes, presets etc. I had an IA setup on the GT to change amp channels there was one time it wouldn't switch on but it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.