Search results

In the past I've connected my turbo tuner mini to input 2. It's always on which is cool, but I was wondering if there is an action I can create to where I can use my turbo tuner mini and mute everything else, as if I were running it inline BEFORE the PBC like a lot of people do with traditional...

I'm sure this is a simple process, but I'm overthinking. Pretty sure some sort of IA button. I have the FN SW jack connected to a JHS switchback to toggle between to pedals. I want to assign a button on one of my button pages to be the toggle switch so to speak. I click it once...it goes to...

Hey Ron, Snagged the Beta version of the Full English from Corey. WOW. This pedal is amazing. Love the sounds and functionality. Can't get a bad sound out of it. The EQ is so powerful. You can make it sound like anything with some creativity. I'm trying to set it up with the PBC/6X. Do I...

Low. On kingsley constable, on middle toggle for output, at 11-1 its loud. If you switch toggle to right its full on and super loud at 11. When this is happening, on either setting it doesnt get loud until 2-3 o clock on master volume knob.

This morning I tried putting the insert loop + in front of loops 2 and 3 and I was getting the same problem. I rearranged the order of the Kingsley in Loop two and put it in the front of everything and same results. Then when I turned off the main buffer, it seem to work just fine. Then what was...

I attached my file and I'll explain shortly what's going on.

Originally it was an HX stomp. So I got kind of suspicious. I rearranged the oedal order in the editor amd saw that + was causing a problem. Constable is in Loop 2. I unplugged HX from insert loop and put in loop 3. Completely removed anything from insert loop jacks. Again, when it was HX (L3)...

I have a Kingsley Constable I use as my dirty preamp. I have that in loop 3 of my RJM PBC 6/X. Was noticing weird volume output problems after a rewire of the board. Checked power, connections, tubes in the pedal, etc... Figured out that on my preset, if I have the + insert loop BEFORE the...

If you need an external aux switch to control PBC and give you two extra buttons, hit me up. Im selling an Analog Endeavors Aux 2 Controller - Sparkle Black. This one specifically is the AUX2RJM.

just in general, because I may go with another midi controlled delay..... manual says: To assign the MIDI device channel: 1. Hold down both stomp switches at power up then release once the LEDs begin flashing white. 2. Now send a MIDI Program Change message on the desired MIDI channel for the...

So on one button page, I basically want to create 3 buttons to correspond with 3 El Cal presets. Slapback, med delay and long delay. Lastly, was going to do one more button with a CC message that turns off the delay mix giving me just a spring reverb. It seems that I for those type of changes...

I turned off the checkbox for HX stomp PC messages on all the presets. I wrote settings to device. Then I changed the preset manually on stomp to some other preset and then mage to the main one. I switched between and it wasn't functioning right. The last thing I just tried was turning IA link...

Ron, attached is my file. Can you look at it and tell me what I'm doing wrong? I'm really trying to keep it simple like you said. I just have one hx page devoted to IA buttons sending CC messages for those blocks on the 1 hx preset. I'm telling all the presets on pbc to send PC message Bank 0 PC...

I removed preset actions and did set up a page of IA buttons just to control blocks on one HX preset. Its a page called HX. That was what Ive been trying to do. I even try doing it through the pbc pedal. I go to the preset, click to thr hx page and turn stuff on and off and store (like I would a...

I feel like that maybe conflicting with cc messages because when I switch presets now, or some checkbox is off becasue certain fx blocks that I assigned cc messages to stay on and don't toggle off when I change rjm presets. Any advice as to what I'm doing wrong is appreciated. I'm sorry for so...

So for the PC action on the looper Action type: PC Device: HX Stomp PC Number (Off) ? PC Number (On) - I assume 3? in the actions window on the left, PC change should be first an dTHEN the CC toggle? If I want to access it separately, do I need to uncheck send on preset change?

I figured out what I did wrong on the snapshots. The looper controls is what I'm trying to figure out. On a similar token, if I want to be able to access the looper (which is PC 3), do I need to go to the IA button and assign actions to PC 3, then to execute the appropriate CC messages to...

I took your advice Drew and tried this Home/IA store on every page External two button switch for bank up and bank down. Bank up has a hold for tuner Page 1 for presets Page 2 is hone w navigation buttons Page 3 is loops 1 (1-6) Page 4 is loops 2 (7-9 bc of split mono) insert loop, 2 fn...

Two questions: 1. I have three buttons set up to control the looper on HX. One button has normal function to start recording. I have a hold on that to stop. Then I have the other two buttons to play and overdub. I set them up in a button group as well. I cant get the hold function to stop the...

Have a question. So I rearranged page 1 of my buttons pages to serve as a home page to take me to other button pages. For example, I set a button to access the drives button page, modulations, presets, HX stomp page, etc.. I made them IA buttons. The action is to Action type: System, Subtype...