Search results

Hi All, Trying to setup patches for the GT16 to control my Suhr PT15. It uses as TRS cable to switch between clean/crunch/lead. On the Suhr pedal, the buttons are 1<->2/3 and 2<->3. The MEGX function switches work as follows with the amp: FN1 off, F2 off - Clean FN1 on - Crunch F1 On, F2 On...

He has come up with a novel way to control both preset A/B, Tap Tempo mode and bank switching from the single TRS input on the Halo from a Boss switcher TRS switching output. Controlling the A/B is easy enough by setting the MEGX to momentary. Is it possible with the GT16/MEGX using the...

Firstly, the communication between the MEGX and the GT16 to activate the Tuner function is working fine. No issue there. I currently have the Tuner assigned as an IA button. No other commands other than System/Tuner and a 119 on/off to activate the MEGX Tuner. If I am on a preset, select the...

Hi, The original state of my PBC6X was a hold for tuner function and tap/release would scroll through pages (loop/switches). I want to reverse that so that a single press will give me the tuner and a hold/tap/release will trigger the page functionality for loops/switches(page scroll). I...

Hi, By using the Function button for alternate preset, is it sending a PC or CC to the receiving device? Thanks!

Hi, The new 5150 head uses P.C. to switch channels but uses C.C. to toggle the Effects loop on/off. Is it possible to use the M.A.G. to channel switch the amp using C.C. instead of using program changes? For example, let's say I pull up preset 1 on the Mastermind which sends a signal to the...