Buttons working in reverse?

skracus

skracus

Active Member
Not sure why but all my buttons are working in reverse. Whatever the button, it becomes active when the button is released not when it is pressed. Had to have been something I did. MMGT System functions work on the press though. Any ideas?

MMGT22 FW 4.2.3 running with Axe-Fx III
 
Yours is a really old GT, right? We used different switches back then, and they're kind of the opposite of the current switches - they're normally closed switches instead of normally open. The GT will typically detect the type of switches and adjust accordingly, but if some switches were replaced with newer switches, it can get confused.

Try this: power up the GT while holding the right hand side black button under the main screen. Keep holding until all of the displays light up. Only hold that one button, nothing else. That will tell it to scan the switches again.
 
You must log in or register to reply here.
Back
Top