GreatGreen
Active Member
Hey, I saw on the products page that there are two versions of cables that go with the 5150 III 100w. By the way, I have a 100w Stealth head if that changes anything. I'm assuming it doesn't, but I'm mentioning it just in case.
Here's the EVH to 2x1/4-inch cable:
https://shop.rjmmusic.com/evh-5150iii-to-2x1-4-inch-interface-cable/
Will this cable will work with any standard momentary switch? If so, can this cable control all three channels PLUS the effects loop? Or does it only control the switching between the 3 channels and leave the effects loop always on, like the other MIDI-to-EVH cable does? Also, is the effects loop controlled with momentary switching just like the channels or is it latching?
Here's the standard interface cable:
https://shop.rjmmusic.com/evh-5150iii-100-watt-model-interface-cable/
Does this cable only work with RJM products, or can any MIDI device be configured to work with this cable? Do currently existing RJM products need firmware updates to be able to accommodate or is the functionality built in?
Here's the EVH to 2x1/4-inch cable:
https://shop.rjmmusic.com/evh-5150iii-to-2x1-4-inch-interface-cable/
Will this cable will work with any standard momentary switch? If so, can this cable control all three channels PLUS the effects loop? Or does it only control the switching between the 3 channels and leave the effects loop always on, like the other MIDI-to-EVH cable does? Also, is the effects loop controlled with momentary switching just like the channels or is it latching?
Here's the standard interface cable:
https://shop.rjmmusic.com/evh-5150iii-100-watt-model-interface-cable/
Does this cable only work with RJM products, or can any MIDI device be configured to work with this cable? Do currently existing RJM products need firmware updates to be able to accommodate or is the functionality built in?