Well thought it was about time I posted some updated pics of my rig as it has changed quite a lot in the last 12 months
In January I finished buiding the Nitrotube pre-amp, a modified Soldano Clone, to ensble this to be added to the rack meant moving the analogue effects to a second flight case. At the same time I made some minor wiring mods and simplified the signsl routing slightly removing some superfluous features I didn't really need or use.
In June I routed the DR3 Drum machine through the splitter mixer so I could attenuate the output signal to suit the poweramp.
In september I aquired and SansAmp PSA1 ( always wanted one and the price was right) the easiest way to incorporate this into my set-up was to move the Marshall poweramp from the main rack into the second flight case with the analogue effects.
so Here is the main rack now
the second rack cabs and combo are currently in the practice hall so no pics at present, not really planning any major changes to it now and I have the signal routing virtually finalized now apart from one possible alteration.
I do need to re-make the rack interface as it now has more external connections than it did previously hopefully I will get his done oer christmas.
THe Current wiring layout is attached along with some modifications I am planning
I have one question for Ron when he has time to cast his expert eye over my proposed modifications contined in the proposed wiring diagram.
The wiring is identical except I am looking to be able to switch the feed to the external pre-amps from the Boss GT Pro Loop 1 to Boss GT Pro Pre loop as this will allow me to run my external pre-amps in parallel with the GT Pros internal amp sims. The only loops I have left are loops 3&4 in the RG16 and I am running loops 1&2 to switch between 2 channels on an external amp that has seperate feeds for each channel. The return on loop 2 is fitted with a dummy plug to block any transmission of the signal from loop 2 onwards.
Basically the signal routing is output 1-4 of the Effect Gizmo (which is the pre-loop from the GT Pro) feeds the buffer in on the RG16 (as I need to split the signal at this point and return the signal before the pre-amps back to the GT Pro via the tuner out. The buffer out of the RG 16 runs to the return of loop 3 and loop 1 from the GT Pro feeds the return of loop 4
so my question is Have I got the switching and and signal routing correct on loops 3&4 ie will this allow me to select between feeding the pre-amps with the signal from the GT Pro Pre-loop or the signal from the GT Pro Loop 1. I know the rest of the signal chain is OK and the pre-amps will return the signal back to the GT Pro via loop 1, loop 2 or both.