MARK V buzz

R

rkaczano

Member
Why does it buzz when switch channels from 2 to 3 and 3 to 2 using the Mini Amp Gizmo?

If I click button 2 (channel 2) for example, the red light comes on on the Gizmo. Note if I click that button again, the red light turns off and the channel stays on Channel 2.

I have noticed that if that button 2 is red and I then choose button 3 (Channel 3) there is a buzz. It seems to happen as the Mark V engages both channels simultaneously. Why is this?

Thanks
 
It sounds like the Mini Amp Gizmo might not be configured for the amp. You shouldn't be able to turn off buttons 1-4 by pressing the same button twice.

Please try the following: power up the Mini Amp Gizmo while holding button 8. After the lights flash, release 8 and press 4. See if that helps and let me know what happens!
 
You must log in or register to reply here.
Back
Top