GregBouchard
Well-Known Member
My "Finished" Pedalboard...
The signal flow is;
Ernie Ball VPJr --> Tuner Split to TC Electronic PolyTune Mini --> Dunlop AIC Wah --> Source Audio Programable EQ --> RJM Mastermind PBC -->
Loop 1 - Empty (For Future Looper)
Loop 2 - Strymon Mobius (Pre)
Loop 3 - Suhr Koji Compressor
Loop 4 - Wampler Tumnus Deluxe
Loop 7 (Routed after Loop 4) - Wampler Clarksdale
Loop 8 - Friedman BE-OD
Loop 9 - Wampler Velvet Fuzz
Loop 10 - TC Electronic Body-Rez (Mounted Under Board, Output routed to a separate Out --> PA)
Output --> Amplifier
Loop Send --> Loop 5 - H9 #1, H9 #2, Strymon Mobius (Post)
Loop 6 - BOSS EQ
Output --> Loop Return
Inputs and Outputs are routed through 2 4 space BTPA panels with locking TS jacks and a MIDI out jack.
Power is from under mounted VooDoo Labs Mondo and Digital.
Button Page 1 controls my Presets and Banks as well as my H9 #2 Toggle and Mobius Toggle.
Button Page 2 controls my loops, reordered as per my layout.
Button Page 3 controls my midi pedals.
What attracted me to the PBC was the flexibility and control available, though I've yet to master all the possibilities. All in all, I'm thrilled with its performance.
The signal flow is;
Ernie Ball VPJr --> Tuner Split to TC Electronic PolyTune Mini --> Dunlop AIC Wah --> Source Audio Programable EQ --> RJM Mastermind PBC -->
Loop 1 - Empty (For Future Looper)
Loop 2 - Strymon Mobius (Pre)
Loop 3 - Suhr Koji Compressor
Loop 4 - Wampler Tumnus Deluxe
Loop 7 (Routed after Loop 4) - Wampler Clarksdale
Loop 8 - Friedman BE-OD
Loop 9 - Wampler Velvet Fuzz
Loop 10 - TC Electronic Body-Rez (Mounted Under Board, Output routed to a separate Out --> PA)
Output --> Amplifier
Loop Send --> Loop 5 - H9 #1, H9 #2, Strymon Mobius (Post)
Loop 6 - BOSS EQ
Output --> Loop Return
Inputs and Outputs are routed through 2 4 space BTPA panels with locking TS jacks and a MIDI out jack.
Power is from under mounted VooDoo Labs Mondo and Digital.
Button Page 1 controls my Presets and Banks as well as my H9 #2 Toggle and Mobius Toggle.
Button Page 2 controls my loops, reordered as per my layout.
Button Page 3 controls my midi pedals.
What attracted me to the PBC was the flexibility and control available, though I've yet to master all the possibilities. All in all, I'm thrilled with its performance.