Preset Button HOLD Action which adds a pedal to the loop?

[EVHGuy1111]

My rig utilizes a MEGX and a MMLT.

I have tried many ways to do this and none have worked.

I have my presets page that load presets when in preset mode and in setlist mode. they work. But I want each preset button to have a HOLD function: when held, the button should ADD a pedal loop from the MEGX into the chain on top of the currently loaded/used preset.

EXAMPLE: the preset on Button 2 loads amp channel, MEGX Loops 2/4/1O/12... then holding that same button (Button 2) will add MEGX Loop 6 so the chain will be; amp channel, MEGX Loops 2/4/6/1O/12.

How do I go about programming this?

 

[rjmmusic]

Set button mode to Hold, switch over to editing the hold function by selecting Hold Function at the top.
Set the hold function's button type to IA
Turn off all checkboxes except Update on Preset Change, which should be on
Add this action: MEGX:Loop 6 / CC Toggle off:OFF on:ON

 

[EVHGuy1111]

Set button mode to Hold, switch over to editing the hold function by selecting Hold Function at the top.
Set the hold function's button type to IA
Turn off all checkboxes except Update on Preset Change, which should be on
Add this action: MEGX:Loop 6 / CC Toggle off:OFF on:ON

Thank you!

Will report back once I get it working or run into trouble.