1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tap Tempo with external control switch

Discussion in 'GT General Discussion' started by xenomorphguitar, Jun 8, 2019.

  1. xenomorphguitar

    xenomorphguitar
    Expand Collapse
    Member

    Joined:
    Nov 17, 2018
    Messages:
    7
    Likes Received:
    0
    Is it possible to assign Tap Tempo to an external control switch, and have the LED flash the tempo? Im controlling an Axe-Fx III with a GT22, both with current firmware, and I'm using the rjm 2-button external switch. Tap Tempo currently works fine on the main board, but I'd like to move it to an external switch if possible... but I need the flashing tempo.
     
  2. rjmmusic

    rjmmusic
    Expand Collapse
    Administrator
    Staff Member

    Joined:
    Jan 18, 2010
    Messages:
    5,461
    Likes Received:
    961
    As long as you're using our switch (or another that's wired correctly), it will flash the LED on the external switch. Just make sure that the switch's Off Color setting is black and the On Color setting is something other than black.
     
  3. xenomorphguitar

    xenomorphguitar
    Expand Collapse
    Member

    Joined:
    Nov 17, 2018
    Messages:
    7
    Likes Received:
    0
    Thank you, Ron! You are the best!!!
     

Share This Page