Entries Tagged ‘amp switcher’

Introducing the Switch Gizmo

The mystery product is the Switch Gizmo. It is a 4 switch function switch with 1/4″ jacks. We wanted to come out with a less expensive solution for people who only need to switch an amp with basic 1/4″ switching. The Switch Gizmo works like all of our other products as far as MIDI and [...]

Ron’s Rig Grounding Tip #9874587456

When building a rack-based guitar rig, it’s more likely than not you’re going to end up with a ground loop or two, which results in a lot of annoying hum. There’s always a solution to these problems, but sometimes tracking them down can take a while.   One frequent cause of ground loops is the [...]

Under the Hood: The Rack Gizmo

Way back in 2007 we released our first MIDI-controlled audio loop switcher, the RG-16. The idea was to improve upon the existing switchers on the market (Voodoo Lab GCX, Rocktron Patchmate, Axess Electronics GRX4, etc.) by implementing not only 8 audio loops but also 8 function switches for amplifier channel control. Previously, other audio loop [...]