The ultimate A/B/Y switch

The Y-Not A/B/Y switch is designed to be an all-in-one solution for switching one audio signal to two outputs.

Use the Y-Not to switch between two amps (for example, a clean amp and a dirty amp), or use it to switch between the inputs of a two input amp. The Y-Not is able to do this cleanly and transparently, without any of the problems associated with traditional A/B boxes.

  • Benefits
  • Specs
  • Photos
  • Videos
  • Manual
  • The built-in buffer prevents tone loss when splitting your signal to two amps
  • A switchable isolation transformer prevents hum due to ground loops
  • Phase inversion switch fixes phase mismatch problems
  • Can be controlled by any MIDI controller, and can be integrated into any MIDI-based rig
  • Rear panel switching jack allows the Y-Not to be controlled by other non-MIDI devices or a 2 button footswitch
  • High quality relays are used to provide the most compatible switching
  • Solid and durable with a powder coated aluminum case
  • One input, A and B outputs, relay switched
  • A and B outputs can be controlled by front panel buttons, remote switching jack or MIDI
  • High quality buffer, switchable from the front panel
  • Isolation transformer on output B, switchable from the front panel
  • Phase inversion switch on output B, switchable from the front panel
  • Standard 5-pin MIDI input
  • 256 presets, arranged in 2 banks of 128
  • Responds to both MIDI Program Change and Continuous Controller messages
  • Dimensions: 4 x 4 x 1.5 inches (10.2 x 10.2 x 3.8 cm)
  • Weight: 10.3oz (300 g)
  • Power requirements: 9VDC @ 150mA



The Y-Not A/B/Y switcher

More videos are available on our Video Page

Manual

Y-Not Manual

 

[ Y-Not ]

$229.00 (USA MSRP)

YB- mod now available

We now offer the YB- mod, which is a modification to the Y-Not that allows you to control the phase of the B output via MIDI. This is particularly useful in two amp systems where the two amps can switch in and out of phase with each other depending on the channels selected on each amp.

The YB- mod can be purchased from our shopping cart.