Recent content by 4x4uk

are you getting a singnal at buffer in try guitar plugging gtr straight to buffer in do you then get a signal at the volume pedal. If you do then the issue is possibly the cable from 5-8 out to bufer in or no signal at 5-8 out

Really nice rig These are my personal favourites but Im sure you can probably fine something similar in the penn and elcom range http://www.adamhall.com/en/ah_19_Parts_ ... lides.html

yes plus one on the neutrik plugs I used nothing else when building my rig for all the standard Jack plugs, trs plugs and XLR plugs. Very robust , reliable and easy to solder.

the dealer page works on all my machines both using windows xp and widows 7 with firefox and or opera The page does contain some javascript, so if your having issues then that is more than likely the problem

an absolute work of art beautiful work as ever

the quick answer is that you shouldnt need an amp gizmo to switch the amp if it has built in midi switching. However I have seen a lot of the so called midi switching in amps be soo poorly implememnted that quite often it renders them useless. by the same token Some are very good and will patch...

if you use the tuner out no if you use one of the loop outputs yes

Re: Rack Gizmo, two Amps, one Multi-Effects Preamp & Process no problem martin glad you got it all working the way you wanted the wiring looks fine and your not doing anything the unit wasnt intended to do. regards ian

Great thanks Ron I appreciate you findining the time to do this regards Ian

Re: Rack Gizmo, two Amps, one Multi-Effects Preamp & Process No problem your welcome Any issues just ask and I will try and help you out Ian

Re: Rack Gizmo, two Amps, one Multi-Effects Preamp & Process Martin No problem your welcome you can select either poweramp or both poweramps whatever you prefer MIght be easier to control if you run the final connection to the amp fx returns from the loop sends on the gizmo rather than the...

Re: Rack Gizmo, two Amps, one Multi-Effects Preamp & Process OK Martin the gsp loop send will allow you to use either the gsp as the preamp or the mesa or marshall preamp wire up as follows GSP send to Loop 7 in, loop 7 send to mesa guitar in mesa return to loop 7 return loop 7 out to loop...

Re: Rack Gizmo, two Amps, one Multi-Effects Preamp & Process JHi Martin had a quick look, its getting late so will chack again tomorrow morning I assume You want signal chain Guitar> GSP or Marshall Premp or mesa preamp > GSP> Poweramps In which case the sends from the GSP are currently...

you dont need both get the rack gizmo amp control as per amp gizmo and 8 effects loops

your welcome I always admire your work always neat well thought out a beautifully put together