Recent content by Alex Silberman

Maybe an advanced vid on bidirectional MIDI with the PBC6/x would be helpful. MIDI in using the proper breakout cables, etc.

Hi all, I thought I'd share how I have my rig set up. It's probably old hat for most, but some may get some value from it. I run a Wet / Dry rig with a single Iridium, a simple passive splitter, and a single TRS to two TS cables Y cable. I take the Insert send on the PBC6/X (because it has a...

You might want to check out the Patchulator. Pluging / unplugging things gives me the jeebies, but maybe something like this would make your life easier. https://www.boredbrainmusic.com/product/patchulator-8000/

Do you have 'Send Redundant PC's' turned on or off in device settings?

In my experience, there is a conflicting error somewhere. I'd do the following: 1. Start with a blank config. 2. Set up the Iridium to receive CC102 (bypass) so you can confirm the MIDI channel is working. 3. If 2 passes, set up two presets with different PC numbers and see if they work...

It seems that reconfiguring ing my pedalboard is an ongoing hobby / obsession (insert smily thing here). Since I can't imagine gigging anytime ever at this point, I'm now focused on breadth rather than execution speed. Each of my preset buttons has an alternate preset so two buttons give me 4...

It's absolutely an annoying issue that wasted a bunch of my time. It shouldn't be that way, but I just don't have enough hours in the day, so fixing it by swapping the presets works for the moment. If your post factory reset patches aren't working, go into the H9's MIDI mapping section and make...

I have the EXACT same issue with my PBC and H9 as well. Most of my presets work fine. i send it PC1 to 10 and it works fine. I send it PC 12-20 and it works fine. I send it PC11 and it fails. I've copied working buttons and changed the PC number and nope, no cigar. In the end, I decided to move...

Thanks! At least I know I'm not crazy. Maybe add this to the wish list?

The issue might be the button the preset is assigned to. Make sure you don't have any quirky settings. I'm imagining having the 'send on preset change' deselected for that one button. Just a quick thought. Good luck!

Disclaimer - Searched the forum for this topic before posting :cool:. I'm trying to set up a button to round-robin between three presets. Preset 1 has alternate preset calling for preset 2. Preset 2 has alternate preset calling for preset 3. Preset 3 has alternate preset calling for preset...

Plus one on the ability to set an IA to reorder loops as opposed to a preset.

Plus one

outstanding!!! As a mad tinkerer myself, I love what you did with it. Well done!

It's evident that if you did it, it would be done well.