Recent content by redjpm

That would be awesome!!!!!!

Folks, Sorry if this is the wrong place for this post, but has anyone seen the latest Guitar World Magazine? One of my favorite sections is the end section showing the Gear that some folks use. This month it features Vivian Campbell and he is using an Effects Gizmo...plus way too much gear. :)

I will try the other ranges tonight. Thanks.

Yes I set CC1 to CC80, CC2 to CC81 and so on and each one of those is set to Midi Ch 16. I did also set PC1 to Ch16. Should I undo that?? Each preset that I set up then has CC80 (and the other CCs) to either 000 (off) or 127 (on) depending on what I wanted to set up for controls. No luck though.

Ron, I have connected the GCX to the Mastermind using the modified Mid cable. It powers up the Mastermind and allows me to set up the Midi Channel and CC values. I also set up banks 0 and 1 to have 10 total presets. Sadly I am not noticing any of the relays or LEDs on the GCX switching...

Thanks Ron!!!!

Folks, I apologize if this has already been covered. I tried searching and could not find the info I was looking for. I just bought an Amp Gizmo that I plan to use with a PODXT Live to control a Mesa Nomad. My question has to do with the Amp Gizmo setup...do I use momentary switching??? Thanks,

Thanks for the response and info Ron. How would I go about ordering the special midi cable you suggest? Thanks,

Folks, I am new to the forum and I apologize if this has been covered. I could not find a post on it so I thought I would ask here. I would like to know if I can use the Mastermind to run a Voodoo Labs GCX switcher. I am reading that he power over the Midi may have a conflict. Could I use...