Wet Dry Wet

Shimon

Active Member
I want to connect my pedalboard as a Wet Dry Wet, according to the PBC10 diagram The input to 7-10 should be from the amplifier's line out ... My Boogie mark V 35 has a cab clone out that simulates a speaker ... Is it ok? Or can I connect the send FX loop as a line out??
 
You can definitely use the line out from the amp if you like, that's the preferred method when doing wet/dry/wet
 
So I have a Mesa Mark V 35 combo that will drive the dry signal... Which amplifiers do you recommend for the wet signal? (for a wet-dry-wet rig)
 
Last edited:
So I have a Mesa Mark V 35 combo that will drive the dry signal... Which amplifiers do you recommend for the wet signal? (for a wet-dry-wet rig)

People typically use a stereo power amp like Fryette/VHT or Mesa. Alternately, any amp that has an effect loop return would be ok - you don't really need or want the signal to go through another preamp.
 
Get a used stereo power amp (Crown, QSC, etc...) and use it to drive your two wet cabs (a couple small 1x12's is perfect).
 
Back
Top