Testifyscott
Member
Is it possible to control 2 different amps, one at a time of course with a Rack Gizmo? I have a Peavey 3120 and a Boogie Mark V.
Two amps one Rack Gizmo
- Thread starter Testifyscott
- Start date
Short answer: yes, look at this:
http://rjmmusic.com/wiring/RG/RG_6Pedals_2Amps.pdf
Long answer: RJM makes a cable for controlling the Mark V, I have one, works great. There is another custom cable made for your Peavey.
http://rjmmusic.com/wiring/RG/RG_6Pedals_2Amps.pdf
Long answer: RJM makes a cable for controlling the Mark V, I have one, works great. There is another custom cable made for your Peavey.
MartinCliffe
Well-Known Member
You can even control 2 different amps, both at the same time. I used to do this with a pair of Peavey heads, and use a couple of the audio loops to select between them. Seems a long time ago now!
Testifyscott
Member
Alright cool, I have the cable for the Peavey already, just got the Mark V so still need to pick that cable up.
both amps will end up being on the same channel using the Amp 1 Amp 2 outs on the RG-16. I use to do this bit if you want 1 amp on clean and one on lead or any combination you will need to use some of your effect loop spots like 5-8 or how ever many you would need for the peavy. Or get a Mini amp gizmo, run RG-16 to one amp and MAG to the other and your problems are solved
Testifyscott
Member
Yeah I thought about doing the mini amp gizmo. Thanks for the help all, appreciate it