There is a power-on reset part of the circuit (around U3-A in the top left of the footswitch schematic) which appears to select the green channel (top of schematic) and set the fx loop flip flop (U2-B, CD4027BC, bottom of schematic).
Similar flip flop also exists in the footswitch PCA, and the...
Also looking at the EVH schematic, the FX loop defaults to on if the footswitch is not connected, and off if the footswitch is connected.
I didn't analyse the circuit that deeply, but I would guess that if the fx line is left disconnected that it will default to on (as ' no footswitch).
I just wanted to ask here if you would make the schematic available now that interface cables and Amp Gizmos are no longer available for purchase.
Or confirm what I have come up with.
It would be greatly appreciated.
I already deduced what I think it should be.
The EVH uses 16V pulse...
Hopefully the redesign is also a bit more flexible with respect to how it supports amp switching - not all non-midi amps use short-to-ground, and the expensive adapter cables on top of buying the amp gizmo were really not ideal. I picked up a mini AG, and I'm not sure how to switch my 5150III...
oh, new effect gizmo? cool.
I have an EG, and was considering a similar product that does loop reordering/parallel loops and mixing.
Can you elaborate on what the new (mini/non mini) effect gizmo might be able to do?
(I have read the manual, sorry if I missed something)
Is it possible for Effect Gizmo to pair up two or more loops so that if one is turned on, they both/all turn on?
When I bought my EG I thought it would do this, but I had wrongly assumed invert mode was an alternative of group...