I think I got it to work. I had not clicked "Active" on the PedalEditor. I clicked Active, wrote settings to device and it now looks (and sounds) like it's working. Thanks!
I'm using the Overture with my PBC6x. Overture midi channel set to 6, PBC/Editor Set to channel 6 and assigned to the overture. When I change presets on the PBC, the display lights don't change to show that I have loaded a new preset. Is that expected behavior? I would assume that the display...
Hi! When I power up my overture it always defaults On/Off to Off. How can I set up the RJM editor so that my PBC 6X automatically turns it on when I select a preset which is using the Overture. THere doesn't seem to be a CC or On/Off. Probably something simple that I am missing...
Thanks in...
Would like to do that following - is it possible?
Mission SP-1 RJM into into Exp Pedal input
Mission SP-1 RJM into into Ex Switch Input (for toe switch on Mission SP-1 RJM)
RJM external 2 Button Switch to Function Switch 1/2 for additional buttons that do NOT control amp switching. Just want...
Eventide suggested it to me. I wasn't sure how to persuade the LT to program a "switch that sends a high value when pressed and a low value when released."
Full response below:
"This is a common problem. The H9 expects a CC value greater than 63 to enable the tuner, but then expects it to go...
Working now for RJM Mastermind LT.
Ext Func switch set to Global
PC Number (Off): Prev
PC Number (On): 124
Midi signal flow light just went on for me.
Thanks!
Hi,
Recently bought an RJM Two Button External Switch and am trying to set it up to turn my H9 tuner on and off. It works great when I press the switch the first time, button lights up and H9 shows Tuner. 2nd press of the button does nothing except turn off the light. H9 still shows Tuner. Do...
Thanks again. Here are the specs on my pedal. It was made by Saturnworks.
Amp / Device Switches - Momentary Double Switch Normally Open Pro TRS
So, it looks to not be a latching switch?
Thanks! I turned off Send on Preset Change and Update on Preset Change on the button. And set the action to CC Toggle instead of CC Momentary. When I wrote the changes to device, i had to press the external footswitch twice to engage/disengage the tuner. I changed the action back to CC Momentary...
Hi!
I have connected an external two button foot switch to my LT. I've successfully set it up to turn the tuner on my H9 on and off on my Presets page and on my page that controls my Space. However, when I choose a preset on the Presets page it engages the Tuner on the H9 and the Tuner won't...
I replaced the board you sent Ron and all seems to be working now. Left it powered up for a couple of hours and the display worked great.
Thanks for all of your help and speedy replies - you are great to work with!
(I also sent this to you via email with the attachment)
Hi Ron,
Powered up the LT via USB when I came home. The screen was back - but a bit funky. I went to contrast in the setup menu - it was set to 24. Changed it to 13 and it looks much better. 5 mins after I changed the contrast setting...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.