Search results

  1. JeffMarshMusic

    Introducing the Overture!

    Excellent information. (I thought for sure presets would save as edited by the pedal. I’m glad I asked). Thanks Ron!
  2. JeffMarshMusic

    Introducing the Overture!

    Thanks Ron! I'm looking forward to trying this. Is it possible to move the pedal in the Heel direction reducing the drive level but also ADD some volume while traveling to the Heel position? I don't believe "Position Switch Actions" is for continuous controllers, so maybe having the minimum...
  3. JeffMarshMusic

    Introducing the Overture!

    Hi Ron, I'd like to learn more about using an expression pedal with Overture. I can see in the MMGT that I can choose the different parameters in Overture in the Preset Actions menu, but I can't find any info about assigning an expression pedal to a specific Heel or Toe position. I'd like to...
  4. JeffMarshMusic

    Introducing the Overture!

    I own a ton of Distortion/OD pedals and this is my favorite after decades of collecting. I thought I'd try it out on a small pedal board, but now I have to get a second one and redo my main rig. It's that good. Looking forward to the editor so I can copy over my presets to the additional...
  5. JeffMarshMusic

    PBC and MMGT transferring

    Thanks Ron, I’ll be careful. But this sounds like it might be a huge time saver. Very grateful!
  6. JeffMarshMusic

    PBC and MMGT transferring

    Hi Ron, I doubt this is possible, but definitely worth asking... As you know, I like to control my PBC (hosting all my pedals) with the MMGT when there's room on stage. The MMGT is way easier to create presets on the fly. Since there will be times I'll only be able to use the PBC, I'd like to...
  7. JeffMarshMusic

    Noise Gate Pedal

    Hi, I recently bought a Noise Gate pedal for the first time. I'm trying out the MXR Smartgate. The pedal is removing a little bit of the high end when engaged. I would think that when the gate is open the full sound should come through, and when activated the gate would stop all sound. I...
  8. JeffMarshMusic

    Sending a volume command to a hardware keyboard

    Hi Ron, We've been trying this with a half dozen different keyboards. I'm sure this is a "3rd Party" issue as the midi monitor shows the MMGT sending the proper data. I'm guessing that if they were rack mont modules it would work. I was just hoping that someone here on the forum has done...
  9. JeffMarshMusic

    Sending a volume command to a hardware keyboard

    Hi everyone, I’m trying to use my MMGT to send volume and program changes to a hardware synth. The program changes are received, but not volume commands. I believe the MMGT is working properly. Has anyone else done this before? Perhaps hardware keyboards do not receive volume commands through...
  10. JeffMarshMusic

    Folding Stereo back to Mono

    Hi Ron, I was thinking of connecting my last 4 pedals (CE-2 chorus, H9, Timeline, and BigSky) in Stereo for the ZERO times I will perform live using stereo. Will the PBC convert back to mono if I only use Amp A? Perhaps a button setting in the back? I don't believe Strymon will collapse to...
  11. JeffMarshMusic

    Preset Actions

    Hi Ron, I wanted to check if I'm missing something. My MMGT has a page on the unit for editing "Preset Actions." I'll do them in the editor app first, but it's nice to be able to tweak when I'm away from the computer. Does this feature exist on the PBC? I can't seem to find it, so maybe...
  12. JeffMarshMusic

    Loop Not Closing

    Hi Boyce, thanks for responding. I did verify that the H9 is last in the chain. I went back & forth with Ron trying different things. Ron was not able to reproduce this with my settings, and he was kind enough to send another PBC for testing. The new PBC failed as well, so I know it's...
  13. JeffMarshMusic

    Loop Not Closing

    Minor Update: I did another test to rule out the Mesa. I unplugged the cable going from the PBC to the Mesa Amp Channel jack. I thought it might be voltage coming from the Mesa, but that is not the case. The bug still happens when the amp channel cable is unplugged. I assume it must be an...
  14. JeffMarshMusic

    Loop Not Closing

    On the MMGT, I set loop 8 to the "On" state and save it to a preset. My amp switching (from the GT) is that top left button which toggles between 3 settings - Clean/Low Drive/High Drive. So if I understand the question, I'm using Presets to call up IA states on the GT. You can see what I did...
  15. JeffMarshMusic

    Loop Not Closing

    Hi Ron, I'm sending you a video of the steps taken to produce the problem. I discovered that the problem occurs when I am switching amp channels on my Mesa Royal Atlantic. When I disable the amp switching, then loop 8 will deactivate as programmed. When Amp Switching is on, Loop 8 will show...
  16. JeffMarshMusic

    Loop Not Closing

    Thank you, Ron. I just sent the 2 files for both. Let me know if a video would help.
  17. JeffMarshMusic

    Loop Not Closing

    Hi Ron, After testing both GT & PBC it seems that the PBC is reliable. I "think" I was able to make the PBC fail once, but it seems to close loop 8 when I select a preset with loop 8 disabled. However sending a (loop 8 off) midi command from the GT will leave loop 8 active while showing the...
  18. JeffMarshMusic

    Loop Not Closing

    I'm setting up both systems to test that. I'll respond asap, but wanted to let you know I'm on 4.3 for everything except the Mastermind Editor. When that file is downloaded from your site, the compressed file says 4.3 but "get info" says 4.2. 4.2 is what ends up installed.
  19. JeffMarshMusic

    Loop Not Closing

    Hi Ron, I'm using my MMGT to control my PBC. When I send the command to close "loop 8" the PBC shows 8 as off, but the loop is still active. From the MMGT, I must step on the IA for loop 8 (redundantly turning it on) and then off again to deactivate the loop. I know it's not an issue with...
  20. JeffMarshMusic

    Editor App for iPad/Tablet

    On special occasions I will bring my MMGT22 to a gig to control my board that contains pedals and PBC. For smaller venues I will use only the pedal board with the PBC. Can any of you guys recommend an existing iPad app that would work well for simple song selection? Ideally I'd love to see an...
Top