Search results

  1. touch33

    "Batched/Grouped" MMGT/AFX3 Preset actions?

    Thanks, Ron. I assumed as much re: batch preset edits – a man's gotta have a dream, although the macro idea a Very Good Thing. I think at this point I'll probably create a dedicated GT page for each major AB/Yek/Whatev group, with macros/expression blocks/etc. for the AFX3 presets in that group...
  2. touch33

    "Batched/Grouped" MMGT/AFX3 Preset actions?

    Hello, All – Today's Stupid Question: I've got my AxeFX3 set up with groups of presets, i.e. 1-230 are tasty AustinBuddy presets, 231-308 are custom presets I've done myself (!), 384-460something are courtesy of Yek (super-cool!) – all interspersed with other smaller preset groups from...
  3. touch33

    WISH: add a Previous Scene button action

    +1, for sure. Having said that, here’s a thread I started around creating a dedicated “SCENE” page in my GT16 so that I could easily switch back and forth between AFX3 scenes within a preset (Alexander’s “Kitchen Sink” preset, to be honest). Not the same as Alexander’s Wish, but sort of gets...
  4. touch33

    AFX3 "Scene" switching

    Ron — Made your changes, both working like champs. Thanks for the fix (and the education). Again. Question: do all of the Preset button HOLD functions need to be the same (IA buttons) or can one Preset button HOLD remain a Scene Menu? I tried it (for a quick rev, anyway) and editing one...
  5. touch33

    AFX3 "Scene" switching

    SO – here's what I've got so far: 1) I created a Page 8 – "SCENES" that contains the eight IA buttons for controlling Scene selection per Ron's suggestion. Seems to work well EXCEPT that it only shows accurate feedback after using the standard "Scene Menu" function to select a scene. In other...
  6. touch33

    AFX3 "Scene" switching

    As always, thanks Ron!
  7. touch33

    AFX3 "Scene" switching

    WELL... I searched for an answer to no avail, so here goes: I presently have my GT16/AxeFX3 set so that five of the Main Page bottom row buttons are "Preset buttons", with their "hold" functions all set to "SCENE MENU" – with the idea being I can lazily press/hold any of them and always get...
  8. touch33

    Finding IA IDs fast?

    ...and why is said "DONE" button so dang small? Now that I'm a seasoned veteran, I only forget where is is every now and then – back in Early Days I'd have given a lot for it to be more obvious.
  9. touch33

    MASTERMIND GT FIRMWARE 4.5.1 / EDITOR 4.5.0

    Thx for the clarification. Wouldn’t have correctly guessed that one either. I’m a big fan of PE — “Pilot Error”...
  10. touch33

    MASTERMIND GT FIRMWARE 4.5.1 / EDITOR 4.5.0

    OK — I give up. “PEBKEC” is an acronym for...
  11. touch33

    WISH: Page Names in Editor Pulldown

    OK – I realize I'm going for the "Absolute Height Of Laziness Award" with this one, but I just can't help myself: it sure would be handy if the names that I've already assigned to each Button Page could appear within the numerical "pulldown" menu at the bottom of each Button Page. Sure, I...
  12. touch33

    AFX3 "control switches" MIDI accessible?

    Turns out the answer is “no”, although it’s apparently been in the Wish List category in the Fractal board since AFX early days. Ah, well...
  13. touch33

    AFX3 "control switches" MIDI accessible?

    Actually, what you describe is REPLACING the control switches with “external controls” — not the same thing. I’m looking for a global solution that won’t require editing two Amp blocks in approx. 1,400 separate preset/scenes. I was hoping that the external “CC” controls you mention (or even...
  14. touch33

    AFX3 "control switches" MIDI accessible?

    As I've been spending more time going thru my most-excellent AustinBuddy Naked Amps presets I've noticed that he uses AFX3 "internal control switches" to allow certain Amp Block parameters (BRIGHT/FAT/BOOST/etc.) to be controlled via FAS FC-6/12 foot controllers. Does anyone know if it's...
  15. touch33

    EDIT: Got the GT-22! New user figuring out functionality.

    Srsly? Get a 22. Or two. :)
  16. touch33

    SP1 exp-GT16-AFX3 setup

    Thanks, Ron. I've re-read my post, and I see what you mean about it needing conditionals. Drat... How about this: create a NORMAL button ("PEDAL") with IACycle function steps of: 1) OFF (a non-used CC, let's say CC=14) 2) WAH (CC=15) 3) VOL (CC=16) 4) WHAMMY (CC=17) I'm guessing I'd...
  17. touch33

    SP1 exp-GT16-AFX3 setup

    hmmmmm... I’ve read up on the programming/spiritual mapping connection required between my Mission SP1 expression pedal and my GT16 to control multiple vol/wah/whammy/trem-speed functions on my AFX3. SP1 is currently plugged into XP1/SW1 ports on GT16. I think I’d like to use the SP1 toe...
  18. touch33

    MMGT22 and Fractal Audio FM3

    I guess “small” is in the flight case of the one doing the flying.
  19. touch33

    External Controller 16 on Axe FX III

    It’s a challenge to keep it all straight — the GT’s (and I assume the rest of the RJM products) can do just about ANYTHING if you can only remember how...
  20. touch33

    EDIT: Got the GT-22! New user figuring out functionality.

    A very happy GT16 user am I, primarily b/c it fits the physical space available in my studio set-up and allows me to access the (oh-so-many) AxeFX3 functions I find I need regularly. That said, a few thoughts: 1) Most of the live users I run into (both here on this forum and on-stage) gravitate...
Top