Search results

The Helix is compressing the hell out of my signal when I go directly into it. I'd like to put it in a MEGX loop so that I can bypass it when needed. I'm having total senior moment on how to put it into a loop w/in the MEGX. Wouldn't I simply use connect it like a normal fx pedal? I've...

It's working ok but I feel there are some areas that could be better

Thanks, I'll check that out. Is there a short video that explains when you should use Send on Preset Change / Update on Preset Change settings? It seems that most of the issues I've had revolved around checking/unchecking those two settings and I've never fully wrapped my head around when I...

Are you supposed to give each button that has a double tap set up it's on IA ID? I copied button 1 (PITCH) to button 16 (FUZZ) and changed the presets from the PITCH to FUZZ presets, however the double tap isn't working on the button 16 (FUZZ), it's working fine on button 1 (PITCH). I've...

Thanks! Ill check that out

So with the older 404sx, you have it set to one channel and the various samples are CC notes?

I've got the old Effects Gizmo, had the Mini X w/ the built in turner but needed more channels. The pedals that I have are a couple H9's and vocal processor. My tuner is in the rack, it runs all the time, I'd like to dedicate a button on the MMGT and stop all output so that I can quietly tune.

I've got a Toraiz SP16 and I'd like to set up a couple buttons on the GT to trigger different pads, synth samples, tracks on the SP16, however it doesn't to be that doable. Would love some input on other hardware devices (don't want to deal w/ a laptop) that could do it.

Can you use an empty loop to send a dry signal to an amp while you're using the out & Tuner for Wet signals?

I'm thinking about going w/ the Rack gizmo instead of my existing mini gizmo x. I'd really like to see the best way to wire the send/rcv cables and power inside a rack w/ a sliding pedal tray. I'll be making my own cables and want to do it right, unfortunately, I cant find any good youtube...

How do you have it set up? Do you have the Iridium in a loop or do you have it after the gizmo (gizmo into iridium into amp / board) I'm currently using a dual amp set up at home and would like to use the iridium direct into the amp w/o a cab. When playing live I want to run direct into the...

So, aside from the normal mono loops, I would need 6 TRS y cables ....2 each for the H9's and 2 for split mono pedals?

I just got another H9 and need to utilize an additional loop as all 6 are taken by non midi/non stereo pedals. Would it make sense to do the split mono loop feature and use TRS's on both H9's. Am I missing out on the stereo aspect of the H9 by doing this? I'm probably not asking this question...

not sure what year it was built but i used the 4.7 legacy version of the editor

SOLVED!

It keeps timing out after I hit start

Loop 1 is not on in the Global settings of the MEGX editor. Now I can't get loop 1 to turn on when I set it within the MEGX editor. If I manually engage loop 1 and save it via the buffer button, it saves and works. I'd love to get the editor and MEGX on the same page but it seems like the...

The lights on the MEGX are lit on loops 1 & 5, is that what you’re referring to?

Not sure how I got that to happen but loops 1 and 5 are on at all times.

That's what I'm thinking, it's an H9 issue, wasn't sure if there was a setting w/in the MMGT that sends a default setting to any preset that has expression pedal settings