Search results

  1. C

    Source Audio Pedals Becoming Non-Responsive on PBC/6X Board

    I had a the SA reverb delay combo on my board for a while, then I ran into it causing distortion in the loop of my Suhr amp. The people at SA and the owner whom I spoke with tried to blame it on the Suhr amp. The owner was not very nice about the idea of having me try another unit and I just...
  2. C

    Wampler Terraform Revised PCB Board in 2023

    Another update for anyone with a newer version of the Terraform pedal (post October 2023). It looks like they removed the "bypass" PC from the original where you could hold the preset button until the presets blink, then select until all 4 LED's light up, then you can hit the bypass button so...
  3. C

    Wampler Terraform Revised PCB Board in 2023

    Spoke with customer service and was able to confirm Wampler did send me the old version of the PCB board. The way to tell is if you hit the bypass switch on the unit, the LED will go blank. On the new version if you hit the bypass switch it turns red. I was given the old version. They will be...
  4. C

    Wampler Terraform Revised PCB Board in 2023

    Yes, something is wrong for sure it seems. I'll see what they say soon I hope.
  5. C

    Wampler Terraform Revised PCB Board in 2023

    Well, I'm not having luck with Pocket Midi or Midi Ox other than PC changes. What's weird is on the RJM even though I can't get CC's to work, the tap tempo IA button I setup on the PBC does work with the new PCB as it did with the old. I've sent an email to Wampler support also on this now, but...
  6. C

    Wampler Terraform Revised PCB Board in 2023

    Thanks Ron, also, I'm noticing that no matter what I do, the Terraform goes to an on state even though I have no settings on the PBC6x set to turn the device on or make any changes. In other words, I removed all settings that would enable a preset or make a change to a preset, and removed all CC...
  7. C

    Wampler Terraform Revised PCB Board in 2023

    Hi Ron, So, I've been using my Wampler Terraform with my PBC6x for a few years now learned of a new updated PCB that Wampler started shipping with the product starting in 2023. Here's a link to the changes that have been made to the new device the are shipping now...
  8. C

    PBC6X, HX One, and Conduit connections

    If you're using TRS midi for all those devices, it won't be more economical since you already have a device (the Conduit). However, you gain ultra flexibility for other pedals from different manufacturers or pedals that use 5 pin midi instead in the future. In my case, I got rid of a midi...
  9. C

    PBC6X, HX One, and Conduit connections

    HI I'd like to throw this out there because I was using a Conduit for a strymon pedal I have on my board. I purchased the RJM multibox and that allowed me to not only remove a midi solutions midi 1 in 4 out that I was using for multiple midi pedals, but also get rid of the conduit because the...
  10. C

    Midi Controlled small form factor latching foot switch

    I have some Suhr pedals on my pedalboard that have dual functionality with a press and hold feature. The pedals also have 1/8" jacks in them so you can control the dual funciton switching with a switcher. I would really like to have something like the amp gizmo but small enough to fit under or...
  11. C

    [DONE] Wampler Metaverse Delay Pedal MIDI

    Ron at RJM = Awesome Sauce!
  12. C

    [DONE] Strymon Next Gen Pedal updates with MIDI implementation

    You Sir, are the man!!!
  13. C

    [DONE] Wampler Metaverse Delay Pedal MIDI

    Wampler has a new delay pedal that has full midi now and I have one of those on the way. Would love to get that in PBC: Wampler Metaverse Manual
  14. C

    [DONE] Strymon Next Gen Pedal updates with MIDI implementation

    Strymon has updated a number of their pedals that now all do MIDI: The Next Generation - Strymon Would be great to get those in PBC as I have a new flint on the way.
  15. C

    Mesa Midi Matrix Setup

    I don't use song mode if that's what you're doing, so I'm not sure if you can use the page button to move off of the song page and over to the foot controller page you setup to make manual adjustments there or not, but I would think you can. I just use preset page, loops, page, and custom foot...
  16. C

    Mesa Midi Matrix Setup

    You leave the Midi Matrix to use CC's only, but by setting up a dedicated page on the PBC that controls all the amp functions on that page, now you can go to presets on the PBC and just edit the page you created for each preset on the PBC. So if you want channel one with eq and no loop, you turn...
  17. C

    Mesa Midi Matrix Setup

    So, you can do this actually by setting up a page for just the foot controller settings via CC messages. Dedicate a page for the foot controller buttons and then just setup your presets by turning off and on the desired settings on that page for the preset via the PBC (not storing presets on the...
  18. C

    Mesa Midi Matrix Setup

    Did you double check the midi channel is set correctly after the reset?
  19. C

    Line6 DL4 MII odd behavior

    Exactly! Totally agree with you. I did plug in a different delay direct to the rjm, then from that delay daisy chain to the dl4 and the issue happened again. I think the pedal is just defective somehow. I’ve never seen something like this before either and have no idea why without a midi...
  20. C

    Line6 DL4 MII odd behavior

    I could try daisy chaining it off another pedal first so the dl4 is not directly connected to the rjm, but I don’t know if that’s even worth testing but I can try it if you think that’s an idea.
Back
Top