Search results

  1. D

    PBC 6/X and El Capistan V2

    just in general, because I may go with another midi controlled delay..... manual says: To assign the MIDI device channel: 1. Hold down both stomp switches at power up then release once the LEDs begin flashing white. 2. Now send a MIDI Program Change message on the desired MIDI channel for the...
  2. D

    PBC 6/X and El Capistan V2

    So on one button page, I basically want to create 3 buttons to correspond with 3 El Cal presets. Slapback, med delay and long delay. Lastly, was going to do one more button with a CC message that turns off the delay mix giving me just a spring reverb. It seems that I for those type of changes...
  3. D

    PBC 6/X and HX midi

    I turned off the checkbox for HX stomp PC messages on all the presets. I wrote settings to device. Then I changed the preset manually on stomp to some other preset and then mage to the main one. I switched between and it wasn't functioning right. The last thing I just tried was turning IA link...
  4. D

    PBC 6/X and HX midi

    Ron, attached is my file. Can you look at it and tell me what I'm doing wrong? I'm really trying to keep it simple like you said. I just have one hx page devoted to IA buttons sending CC messages for those blocks on the 1 hx preset. I'm telling all the presets on pbc to send PC message Bank 0 PC...
  5. D

    PBC 6/X and HX midi

    I removed preset actions and did set up a page of IA buttons just to control blocks on one HX preset. Its a page called HX. That was what Ive been trying to do. I even try doing it through the pbc pedal. I go to the preset, click to thr hx page and turn stuff on and off and store (like I would a...
  6. D

    PBC 6/X and HX midi

    I feel like that maybe conflicting with cc messages because when I switch presets now, or some checkbox is off becasue certain fx blocks that I assigned cc messages to stay on and don't toggle off when I change rjm presets. Any advice as to what I'm doing wrong is appreciated. I'm sorry for so...
  7. D

    PBC 6/X and HX midi

    So for the PC action on the looper Action type: PC Device: HX Stomp PC Number (Off) ? PC Number (On) - I assume 3? in the actions window on the left, PC change should be first an dTHEN the CC toggle? If I want to access it separately, do I need to uncheck send on preset change?
  8. D

    PBC 6/X and HX midi

    I figured out what I did wrong on the snapshots. The looper controls is what I'm trying to figure out. On a similar token, if I want to be able to access the looper (which is PC 3), do I need to go to the IA button and assign actions to PC 3, then to execute the appropriate CC messages to...
  9. D

    Your PBC6X / HX Stomp set ups

    I took your advice Drew and tried this Home/IA store on every page External two button switch for bank up and bank down. Bank up has a hold for tuner Page 1 for presets Page 2 is hone w navigation buttons Page 3 is loops 1 (1-6) Page 4 is loops 2 (7-9 bc of split mono) insert loop, 2 fn...
  10. D

    PBC 6/X and HX midi

    Two questions: 1. I have three buttons set up to control the looper on HX. One button has normal function to start recording. I have a hold on that to stop. Then I have the other two buttons to play and overdub. I set them up in a button group as well. I cant get the hold function to stop the...
  11. D

    Your PBC6X / HX Stomp set ups

    Have a question. So I rearranged page 1 of my buttons pages to serve as a home page to take me to other button pages. For example, I set a button to access the drives button page, modulations, presets, HX stomp page, etc.. I made them IA buttons. The action is to Action type: System, Subtype...
  12. D

    Your PBC6X / HX Stomp set ups

    I'm thinking I can try and keep the Page/Store button in its stock place so I can always access and return back and then make the other buttons on that first page to take me to other pages. Like you, use a drives, modulation, delays, setlists, HX snapshots and then HX blocks (to access just...
  13. D

    Your PBC6X / HX Stomp set ups

    another question. Let's say I decided against a separate controller. Technically, I could set up 1-2 whole page of buttons in the PBC 6/X to control most of all the features in the HX. IE....page 1 - three of the buttons could control snapshots, one button for tap tempo, one for tuner Page 2...
  14. D

    Your PBC6X / HX Stomp set ups

    That's amazing man. You inspired me to snag an MC6 to do similar things. I was wondering if you think the MC6 could do double duty: To control pages on the PBC, but then if I needed I could transfer the MC6 to my smaller board and set it up to control certain features on the HX alone? Like page...
  15. D

    Help with Source Audio Collider CC

    how are you able to control both sets of bypass states..like... if you want a PBC preset to recall preset 1 on SA Collider with just delay and no verb?
  16. D

    Help with Source Audio Collider CC

    can you explain in more detail what you mean by using the later ccs? would love to know as I do enjoy the pedal and it's sounds / usage
  17. D

    MEG-X not retaining loop order

    Figured that might be the case. Im interested in MEGX because of its simplicity and that I could do 12 mono loops and that would cover all my pedals. But I feel like PBC 6/X is so powerful that it may not be smart to just use MEGX and a good midi controller. I gotta map out how I might order...
  18. D

    Help with Source Audio Collider CC

    That looks like a great one. Too much pedal for me though. I only really ever use tape and digital delays so I dont need something that robust. Right now just using cc bypass messages is working for the delay on or off since i leave reverb on. I feel like I may have to make my workflow similar...
  19. D

    Help with Source Audio Collider CC

    So what did you end up with? Right now its ok and working bc I always leave the reverb on, but I was considering Alexander History Lesson V3 or Walrus D1 and a simple plate verb to run into
  20. D

    MEG-X not retaining loop order

    I wanted to ask some questions about the loop order when it comes to the new effects gizmo. If I’m using it with my PBC 6/X, how can I arrange the loop order of the effects in PBC vs the order of the ones in MEGX? Or is that not possible. I read parts of the manual, but sysex Im not familiar...
Top