Search results

I use the same with the exception of the SPS5s, I use the G&H TS stubbies. I appreciate the strain relief.

WooHoo! I like your enthusiasm.

It looks like a European power bar.

Of course, I had done that, but the change was kicked out and didn't function so I tried the Performance switch which worked as a latch and i Got frustrated. Thanks.

I feel like a bit of a Dufus. I had to reset my H9s a while backend I just noticed that I'm no longer able to control them with my Mission RJM pedal. I have the CC set to 17 in the Expression Pedal Settings, but I'm not finding the Expression Pedal MIDI Mapped in my H9 Control app. I'm sure the...

Thank you.

Thanks for the quick reply. I've mapped the Active/Bypass to CC 10. I use the H9/Switches button at the top of Button Page 1 for switching as well as a MIDI Device control page on Page 4. It worked for years previously, I recently reset my H9 for an unrelated reason and it hasn't worked...

I recently reset my H9, and ever since I need to press my button on my PBC twice before it toggles between Active and Bypass. This is both annoying and screws up the coordination with my button's on/off colour. I'm figuring that I inadvertently screwed up a setting, any ideas?

Thanks for the quick reply. Here are the 2 files

I just updated my PBC 10 to firmware 4.61. Now when pressing a preset button, after briefly having sound, my rig goes silent. Upon pressing the same preset button a second time, I get sound like I normally would. Returning the PBC to firmware 4.5 and updating the settings, everything works as...

Upper right. That’s what I needed. Thanks.

How would one program the toe switch on the Mission RJM-1? Like if I wanted it to control a preset on a strymon pedal on and off?

Just bought a Source Audio EQ2. I would appreciate command support.

those plugs are now on their website. They have no strain relief, but that shouldn’t be a problem for a pedalboard.

I already do for Chanel switching, that’s why I’m a bit embarrassed about my brain fart.

Right, I was thinking they were part of the 4 extension switches, my mistake. Thanks.

Where in the editor do I program the function of the expression pedal’s toe switch? I have the pedal’s output1-TRS- expression pedal and the output2-TRS- Ext Switch (Not Ext sw 1/2 or Ext 3/4). I’m wanting it to be a copy of my Mobius by-pass which I have on my PBC-10.

There’s a tutorial on YouTube and I believe here demonstrating the method.

This was my old board

Every couple of years you have to start over. I found my pedal train board was messy, so for Xmas I bought myself a Friedman Tour Pro board and bridge and a pantload of connectors from BTPA. I'm very pleased with the result.