I have a mini effects gizmo under my pedal board but there is barely any room. Can the gizmo be placed on top of my board with pedals on top of it? If this has been asked previously, I apologize.
I have four button pages: Presets(default), PedalBoard, Amp Functions, and Delay Pedal. Getting to page 2 is simple by selecting th Page Up command. But how do I go up 2 or 3 pages with one Hold action? I tried setting the Hold function for a preset to go to a particular page with an IA...
A few days ago I got a device not found message when attempting to transfer settings from the editor. I unplugged, cycled power and everything came back up.
Today it happened repeatedly. I finally hunted down another USB cable and the problem went away. I figured I had a bad cable until the...
Ron,
Sorry to wear out your forum with questions today but I just received my Fuchs ODS cable in the mail. Seems to work great. In the documentation, Switch 4 reads TDS only but appears to be one of the boosts for the ODS. Is switch 4 the preamp boost and switch 6 the 2nd stage boost?
Mark
This doesn’t look like an issue but thought I would ask.
Can the Mastermind LT supply enough current over phantom power to power the Mini Amp Gizmo?
Will it work over a 7-pin 20 foot cable? I want to locate my Mini Amp Gizmo in the bottom of my Combo amp.
I am getting ready to purchase an Amp Gizmo and a Fuchs ODS cable.
What is the mapping Gizmo Buttons( and corresponding CC messages) to the amp functions ( Boost 1, Boost 2, Mid Boost, Channel, Reverb)? Or does that info come with the cable?
Is there an advantage to using presets for the Amp...
I wanted to get some feedback/suggestions on this rig. I "threw" it together almost two years ago and have had zero issues! I am getting ready for phase 2.
Main Components:
Mastermind LT
Mini Effects Gizmo
Friedman 25" Board with Patch Bay & Power Supply
Midi Solutions Midi Thru ( I have...
I own the Mastermind LT and the mini effect gizmo. I am considering a Fuchs ODS Classic 50. If I want to control all the features in the ODS(channel, reverb, boost, both gains) from the mastermind LT. To do this I assume I need a Mini-amp Gizmo and the Fuchs ODS cable that is on your website...
I am attempting to use IA Cycle for channel selection of my GrandMeister 36. I attached some snapshots of my settings. It mostly works but I cannot select the clean channel for some reason. It cycles through the 2-4 channels and then the button turns BLUE?
My H&K Grandmeister amp has midi control. The amp has presets with digital effects that can be controlled by midi. I want to override the effect settings with the Mastermind and use the effects on my board. This is simple to do.
My question is, is there a way to automatically send a...
The Mini Effect Gizmo manual states:
"Out – This is the passive output from the Mini Effect Gizmo. This jack is directly connected to the output of loop 5, with no circuitry in between. You can use both the Out and CS Out jacks simultaneously if desired. For example, you can plug the CS Out jack...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.