Search results

Hmm, actually how i have it set right now is Eventide Left is on loop 7 and Eventide Right is loop 8. So i guess its kinda goin in series kinda thing. N then from loop 8 it goes in the amp fx return. I just turn on loop & for Left and loop 8 for Right. That works fine right? Is there a reason...

I will be running the basically the eventide H3000 in stereo in parallel with my dry sound to one amp... or sending off wet lineouts to different amps, even straight to the FOH mixer (at least would like to hv the options to when the venues provide). I will not hv a separate poweramp n cab...

Oh wow thats quite obvious then. I should opt to keep using my RG16. God knows after ive tasted that its really hard to enjoy other setups. I will just use a smaller setup with the RG16. Yes i hv a Mark IV, but which ground switch are u talkin about? U mean on the Mark IV itself ??? or the RG16...

Ron, ive been using the RG 16 but my rigs seems to hv been to big here (10U Rack). So ive been using a pedalboard for live and just use the RG16 in my studio. Had to keep removing the analog pedals back n forth. So i came up with this idea of just having RG16, Pedals and Furman which makes it 4U...

4x4...i agree with u. Imagine the feeling i have being literally the only person in this country (right now im in Malaysia) to obtain this piece of beauty. I mean even back in my hometown in Indonesia the big sessionist and even those who were my 'idols' would be in awe. Id explain to them my...

No worries Ron, i have just in a day made my RG16 very personable....Its like having a ding on ur fave strat :) . Yes i kinda know what working in factories require...i had the experience of being the only worker in an acoustic guitar factory in Singapore. Screws and such sometimes just happen...

Noise is solved...at the cost of almost destroying my RG16 :( !!! What happened was i was unscrewing all the screws and everything was fine except the one above the Amp1 midi socket. Apparently the screw was almost stripped when i got it n when i tried some more it completely stripped. Tried...

Hey Ron, everything works great with my setup. However i just had a Furman PL Plus added and i noticed today there is a hum when i go through the RG16. I know someone posted about the hum but i wanted to double confirm with you. So the hum is there when i plug through the RG16 and the rest of my...

Re: Plugging wallwarts adapters on Furman Power Conditioners Cheers Martin, that Diago seems like a decent solution....if i can find one ard these parts. No funds at the moment so perhaps ill use the duct tape method for the time being. Thx for the great suggestion :) ....another solution that...

Re: Plugging wallwarts adapters on Furman Power Conditioners Duct tape it is then ;-( ... Eventide Timefactor has been having these big ridiculous power adapter problem. They say that only their adapters are recommended(its huge!)...voodoo lab says their PP2+ works if u use the L6 output...

Ron, my RG16 as expected is working superbly ;D...as always here in no-man's land (Malaysia and Singapore) it is hard to get anything so my rig is slowly coming along. A quick question though, how would one plug the adapters (of the RG16 and Eventide Timefactor) on the Furman securely so that...

Hey Ron and RJM folks, got a question here. My RG16 works great and does everything i need it to. I just have a setup question on how to combine the stereo output of my Eventide H3000 to a single output so that i can hv the stereo effects working with one amp. Is there a device that can do that...

Definitely some kind of an RG16 on the floor...at least 8 loops with amp channel switching feature...doesnt matter if the loop buttons doesnt change the amp channels at once. Even if it was separated it still means pressing 2 buttons (amp channel select and effect loop select) instead of doin...

Hey guys, droppin my 2 cents here...my idea isnt some technical electronic stuff, u guys can come up with that, i know nuts. Mine is simply...'a display' screen please :). I wanted so bad to get the Mastermind but instead got the Ground Control cos of display feature. If im playin those session...

Again, thx for the delightful insight...i think i get it better now. Basically the 1st half is a straightforward looper that turns on or bypasses and the second half has the routing options for multiple configurations depending where u want to 'tap' the inputs and outputs to...sounds bout...

Oh wow, thx Martin for that explanation, appreciate it mate. Its a lot clearer to me now the possibilities of the RG-16. Although im still not sure why the 1st half of the loop has no In+Out, just send and return while the 2nd half has INs and OUTs as well. Whats the purpose of this??? Im...

Geesh, i dont understand the logic behind the diagram. Why isnt it wired the way its shown on the manual? The crisscrossing of the cables confused me...do explain :). What is the NO and NC on the 2nd half of the loops? What do they do? Thx guys.

Hey Ron,Sheri, Martin, Alex here joining the wonderful RJM family :) ... mine id hv to say its my Mesa Mark IV...i was that little kid who sat in stores for hours and dreamed of playing the big boys rigs. My goal was the Dual Rectifier cos i thought that was the amp for the sound i kept...