Megahertzz
Active Member
Just finished my Axe Fx III rig. Gotta say I'm pretty satisfied
Gear:
SKB 6u rolling rack:
In the back of the rack i have an RJM phantom power box, that provides midi signals and power to the GT22 through a 6 pin XLR cable. Everything is powered from the power conditioner, so that AXE FX, power amp, wireless and GT22 turns on by the press of only one button.
As for programming the GT22, i used the file user iaresee posted a while ago, and modified it quite a bit. The page setup is pretty similar, but tap tempo and tuner are combined in one button, and switching presets are done a bit differently. I want to have the tuner engage when the heel of exp. pedal 1 is down, and the toe switch (ext. ctrl. 3) is off, but i don't know how to make it happen. If anyone can help, I would be very grateful. Here are some screenshots and the file for those interested:
Gear:
SKB 6u rolling rack:
- Furman PL-PRO DMC E power conditioner
- Matrix GT1000FX power amp into a Matrix CFR12 monitor
- Shure QLXD4 wireless
- Axe FX III
- Mission Engineering EP1-RJM x2
- Mastermind GT22
In the back of the rack i have an RJM phantom power box, that provides midi signals and power to the GT22 through a 6 pin XLR cable. Everything is powered from the power conditioner, so that AXE FX, power amp, wireless and GT22 turns on by the press of only one button.
As for programming the GT22, i used the file user iaresee posted a while ago, and modified it quite a bit. The page setup is pretty similar, but tap tempo and tuner are combined in one button, and switching presets are done a bit differently. I want to have the tuner engage when the heel of exp. pedal 1 is down, and the toe switch (ext. ctrl. 3) is off, but i don't know how to make it happen. If anyone can help, I would be very grateful. Here are some screenshots and the file for those interested: