Can the values for controlling switches be changed?
For example from factory switch 1 is controlled by CC88:
range 0-63 SW1 is off
range 64-127 SW1 in on
can be change to :
range 0-3 SW1 is off
range 4-127 SW1 in on
I assume this will need some updating of firmware o so.
Cheers!
For example from factory switch 1 is controlled by CC88:
range 0-63 SW1 is off
range 64-127 SW1 in on
can be change to :
range 0-3 SW1 is off
range 4-127 SW1 in on
I assume this will need some updating of firmware o so.
Cheers!