Hello,i test pbc 10 ament ago,i found a issue.i have 5 midi devices,strymon mobius,timeline,bigsky,rjm mini amp gizmo and engl e570,i set channel
MOBIUS 1,
TIMELINE 2
BIGSKY 3
MINI AMP GIZMO 4,
ENGL E570 5.
I set 3 test preset on editor,1st preset: mobius pc1 ,time line pc2;2nd preset timeline pc4,bisky pc3,mag pc5;3rd preset mobius pc2,mag pc4.but when i press L1,2,3 button,Only the mobius changes, other devices do not move. I thought it was a cable problem. I used a midi cable to connect the devices behind the mobius separately. Except for the e570, I didn't connect it, and every device worked normally. I connected the mobius midi thru with this single wire to timeline, and the situation returned to the same as it was at the beginning. Connected to the timeline thru, the equipment behind is also inactive. Did I miss anything in the settings?