Exp pedal not affecting H9

Big Lid

Well-Known Member
I've calibrated my dual axis expression/vol pedal (db Instruments M440se) in MMGT16, I can see the bar move along the bottom of the LCD however, nothing is happening w/in my H9. It's connected via two TRS cables into the back of the MMGT, one TRS for the left/right and one for up/down.
 
Make sure that the expression pedal is set to send CCs (in the GT's expression pedal settings), and the pedal is set up to receive those CCs. It's been a long time since I've done anything on an H9, but you probably also have to set up your H9 presets to map the expression pedal to specific parameters.
 
Thanks, I got that working, now the MEGX won't trigger presets however it will trigger IA loops.
When I try to access a preset, the lights on the MEGX will flash real quick on the loops that should be triggered but nothing happens, the lights don't stay lit and the presets aren't triggered.
 

Attachments

  • Screen Shot 2022-01-16 at 8.07.35 PM.png
    Screen Shot 2022-01-16 at 8.07.35 PM.png
    86.9 KB · Views: 0
  • Screen Shot 2022-01-16 at 8.07.44 PM.png
    Screen Shot 2022-01-16 at 8.07.44 PM.png
    75.9 KB · Views: 0
  • Screen Shot 2022-01-16 at 8.07.51 PM.png
    Screen Shot 2022-01-16 at 8.07.51 PM.png
    86.8 KB · Views: 0
  • Screen Shot 2022-01-16 at 8.07.59 PM.png
    Screen Shot 2022-01-16 at 8.07.59 PM.png
    87.3 KB · Views: 0
The IA buttons are overriding the settings stored in the MEGX preset. I recommend programming the MEGX loops on the GT instead of programming them on the MEGX. In the Presets tab, click the buttons in the IA Buttons pane to turn on the loops you want to have on for each preset.

If you do that, the advantage is that the IA buttons on the GT will always match the state of the loops on the MEGX.
 
Back
Top