IA and Effect Gizmo Question

Sammy

Member
I have recently purchased an Effect Gizmo and MasterMind.

With my setup, I want the effect in loop 1 to always be on and I like to be able to use IA mode to individually control other effects.

Is it possible to set loop 1 to always be on and set button 1 on the MasterMind to control loop 2 on the Effect Gizmo?
 
You can use grouping to force loop 1 to always be on:

- Power up the Effect Gizmo while holding the 4 button. Keep holding until the lights flash. Release the 4 button.
- Press the 1 button to turn it on. All of the others should be off. Press the Write button.

To make IA button 1 control loop 2: On the Mastermind, configure CC1 to send controller number 81:
Hold the 1 button, press 3.
Press the Function button repeatedly until the display reads CC1 / CH01 / c080
Press the 2 / Program / CC Number button to increment the display from c080 to c081
Hold the 1 button, press the 3 button to exit setup.

That should do it.
 
Back
Top