Mastermind and GCX - Saving Presets and power on issues

Boogieness

New Member
I just wanted to share with you a couple of issues that I had using my Mastermind with the Voodoo Lab GCX.
Basically, while connected to the GCX via MIDI and not using the phantom power but its own power adaptor I had problems saving the presets, no changes were saved after exiting the Setup mode. Same thing in the Global settings mode. With the mastermind connected I had this problem but with the MIDI cable disconnected it worked perfectly and I could save every setting just as it should.

One more problem I've noticed is when both are MIDI connected and you power on the GCX, some of the Preset settings in the Mastermind are like erased. I guess that is done by the GCX but this is just my theory. The solution is powering both first and then connect them via MIDI.

This didn't happen with other types of audio switchers.

I'm curious if you guys who own the same switcher had a similar experience.

Darius
 
This isn't something that I've heard of happening before, but if you send in your Mastermind, we can take a look at it and see if anything's wrong with it. Those are very odd symptoms...
 
Back
Top