MASTERMIND GT FIRMWARE 4.5.1 / EDITOR 4.5.0
- Thread starter rjmmusic
- Start date
- Status
Thank you Ron! I'll be updating my GT22 tomorrow so will let you know how that goes.
Many thanks!!
BUG:
When changing the settings for external switches in the hardware UI, the values don't stick.
Examples:
- Configuring an ext.switch to perform Preset+ or Preset-
- Changing the ON state of an ext.switch to CC value 0, and the OFF state to value 127
When leaving the menu and re-entering it, the old values are back.
Doing the same in the software does work correctly.
This is an old bug, I believe.
@rjmmusic
When changing the settings for external switches in the hardware UI, the values don't stick.
Examples:
- Configuring an ext.switch to perform Preset+ or Preset-
- Changing the ON state of an ext.switch to CC value 0, and the OFF state to value 127
When leaving the menu and re-entering it, the old values are back.
Doing the same in the software does work correctly.
This is an old bug, I believe.
@rjmmusic
SUGGESTION:
"IA > New Action > System > Song" lets me configure switches to scroll up or down through Songs. That's great.
It requires to enter a value for OFF and a value for ON. Apart from the numeric values, the options are: UP, DOWN and SAME. There's no "NONE", and this makes impossible to make each "tap" work.
Please add the "NONE" option.
Alternatively, just add SONG- and SONG+ to the list of button actions,
"IA > New Action > System > Song" lets me configure switches to scroll up or down through Songs. That's great.
It requires to enter a value for OFF and a value for ON. Apart from the numeric values, the options are: UP, DOWN and SAME. There's no "NONE", and this makes impossible to make each "tap" work.
Please add the "NONE" option.
Alternatively, just add SONG- and SONG+ to the list of button actions,
Yes, I tried that and thought it didn't work. But I tried again just now, and it's okay now. Thanks
- Status