Mastermind GT Firmware/Editor 4.8.1 (or 4.8.2???)

Status
Not open for further replies.
Can confirm some weirdness with the Mac version of the latest Editor release.
The target Mastermind is a GT/16 (2018) ... the v4.8.1 firmware update was performed with a USB stick.

I have loaded the RJM Editor software onto:

- a MacBook Pro running 10.15 Catalina (Intel),
- a MacBook M1 running 12.4 Monterey (ARM), and
- an ASUS Zenbook running Windows 10.

Baseline:
Firmware v4.7.0 with Editor v4.7.0 connects to the GT/16 correctly on all laptops and has been working great since the v4.7.0 release.

Firmware v4.8.1 with Editor v4.8.0 on MacBook Pro running 10.15 Catalina (Intel) will connect to the GT/16, operates as expected.
Firmware v4.8.1 with Editor v4.8.1 on MacBook Pro running 10.15 Catalina (Intel) will connect to the GT/16, operates as expected.

Firmware v4.8.1 with Editor v4.8.0 on MacBook M1 running 12.4 Monterey (ARM) will connect to the GT /16, operates as expected.
Firmware v4.8.1 with Editor v4.8.1 on MacBook M1 running 12.4 Monterey (ARM) will not connect to the GT/16. Will not connect.
I rolled back the Editor from v4.8.1 to v4.8.0 to get the Editor to work on the M1.

Firmware v4.8.1 with Editor v4.8.2 on ASUS Zenbook running Windows 10 will connect to the GT/16, operates as expected.

In these tests, only one cable is moving. The 15' USB cable to/from the GT/16 on the computer end.

I have working setups for MacOS and Windows ... so ... I am happy. :)
I am going to look at the MacBook M1 closer tomorrow to ensure there is not something I am missing in the M1 / Monterey setup.
Thanks Ron.
 
Status
Not open for further replies.
Back
Top