Mini FX Gizmo Loops Always On?

MattRemixed

Active Member
Hi folks,

I picked up a MEG to add a few more loops to my PBC. It works great!

In the MEG I have a Clinch FX EP-PRE (always on), and a compressor (on 95+% of the time). I was wondering if there was an easy way to set the MEG loops for these pedals to be on by default to save me having to change every preset? It's easy enough to do with the PBC's native loops via the Audio tab, but I can't see an obvious way to do it with MEG loops.

I could set up a MEG preset, and that would kind of get me part way there, although I prefer turning off PC sends for the MEG to cut down on the amount of device PCs in each preset.

Peace,
Matt
 
You can set up one loop to be always on, but you can't do it for more than one loop. Hold the 4 button on power up, after the lights flash, release 4 and press the button that you want to stay on. Then press Write.

In case you're wondering, if you turn on more than one loop in that mode, the loops will be grouped together so that only one loop can be on at a time - turning on one loop will turn the other off. Not what you want in this case.
 
Back
Top