MM GT 10 and Power Brick

boutte

Active Member
Just spoke to Strymon about their Ojai RC30 power supply and you can use a Voodoo current doubler cable on both of the multi voltage outputs at 12v to get 750 mA total. I'm assuming I'll need a polarity switcher as well since the GT is center negative.

Just thought I'd share for folks looking for power brick options.
 
The GT will actually take either polarity, no polarity flip needed. It sounds like it should work, please let us know the results if you try it!
 
You know that's what I thought - but the folks at Gigrig said it had to be center positive. Good to know and I will report back. Thanks!
 
And it's all good if anyone is wondering. Used a current doubler on the two variable voltage outputs and everything works like a charm.
 
Back
Top