My finished PBC board

Happy to be a part of the club now!
Signal chain
Shure wireless
CAE wah
H9 Pre side
Into PBC
Loop 1: Pog
Loop 2: SP
Loop 3: EP
Loop 4: BB+
Loop 5: OCD
Loop 6: BE-OD
PBC Out 5-6 into Boss volume
Into H9 post side then out to BTPA patch panel Send/Receive for FX loop or trying out pedals (tiny jumper cable when not in use)
Back into PBC In 7-10
Loops 7&8 are open
Loop 9: Timeline
Loop 10: Big Sky
Out of PBC to BTPA panel
Amp I'm using is a Carr Slant 6V

I think that's it!

IMG_9964.JPG IMG_9969.JPG FullSizeRender 4.jpg IMG_9965.JPG
 

Attachments

  • IMG_9964.JPG
    IMG_9964.JPG
    2.7 MB · Views: 10
Excellent! I'll be setting up something very similar for myself. What are the two different connectors you are using on the top row of your PBC? I'm trying to find the best connectors to use without sacrificing too much space...
 
Looks great, Vince! Tell me the piece of Velcro on the jumper cable is to have more leverage on pulling that cable out of the panel? I hate pulling the Stubby connectors out of locking jacks!
 
Looks great, Vince! Tell me the piece of Velcro on the jumper cable is to have more leverage on pulling that cable out of the panel? I hate pulling the Stubby connectors out of locking jacks!
Yeah definitely to help pull! :) I also put a piece of velcro on the side of the PBC to stick the cable to it when it's in the case.
 
Back
Top