Need some Help for the effect gizmo

[AK47]

First, scuse for my poor english ! i'm just a little french !
I've got the effect gizmo & the mastermind, it's my first rack and i've got some problems with the independant loop (about Audio Loop 9 through 12).

This is my setup :
Guitar : ESP Eclipse
Amp : Diezel VH4
Cab : NOS

Line 6 G30
>>> input 1-4
Loop 1 : Cry Baby Rack
Loop 2 : Keeley TS9DX FLEXI-4X2
Loop 3 : Siegmund Microtube OD
Loop 4 : Zvex Fuzz factory
<<<output 1-4 to input amp

>>>send Loop amp to buffer in
Buffer out>>>input 5-8
Loop 5 : Katana Clean Boost
Loop 6 : Mini Flanger Guyatone
Loop 7 : EA Hog
Loop 8 : Anolagman Bi-Chorus
<<<CS out<<<return loop amp

tuner out>>> korg dtr2000

I've got a lexicon mpx g2 and I want to put it in the loop 9. But it's don't working... and i don't unterstand the diferencies with in 9, send 9/NC, Out 9/NO and return 9.
And after I want to buy a korg sdd 2000 and a kaoss Pad to put in the 10 & 11 loop...
That's All..
And i've got a hum problem :lol: sch*** !!!

 

[MartinCliffe]

The hum problem may well be a ground loop issue due to using pedals both before and in the loop of the amp. That's a strange place to put the buffer - the loop will already be buffered anyway.

Putting stuff in loop 9 is simple - from how you've got it set up now, connect a cable from the CS out to the IN 9 jack, connect Send 9 / NC to the input of the processor, the output of the processor to Return 9, and the Out 9 / NO jack to the return of your amp (or to loop 10 etc and repeat the above process).