PBC 6X - Tuner Out not working

kingb

Member
Hi - I'm trying to get the "Input 2" to works as a "Tuner Out". I have "Tuner Out" = On in the main audio settings, have "Buffer 1" = On, and have verified that the preset is using the default values (grey and On) for both. I've also tried multiple cables and tuners - and made sure each work independently.

It seems that I'm getting a very small bit of signal to the tuner but not enough for it to work properly. If I plugin directly from the Tuner Out directly to my amp and CRANK it, I can hear that small bit of signal.

Faulty unit or am I missing a setting somewhere?

FW 4.2.1
Editor 4.2

-kevin
 
'Audio Page' should be set as attached image. Be sure you have 'Stereo Output' checked.
 

Attachments

  • Screen Shot 2019-06-27 at 5.41.16 PM.png
    Screen Shot 2019-06-27 at 5.41.16 PM.png
    90.1 KB · Views: 28
Back
Top