Remote Switching Kingsley Pedal

D

DavidD

New Member
Hello,

I’m wiring up my new PBC6x and I have a Kingsley Harlot overdrive pedal that can activate the second “more” switch using a TRS insert in the output jack and shorting the ring to the sleeve. I picture having this pedal in loop three with the ring side from the TRS going to the FN SW Jack on the PBC6x. Does this sound right? Also, how would I set this up in the editor?

Thanks!!
 
I've never tried it, but given that description, that's exactly what you should do. Function Switch 1 will control that switch once the ring conductor is connected to the function switch jack.
 
Okay I’ve got it wired up! How would you set this up in the editor? I’ve made an IA button for off and on function 1 but having no luck.
 
You should just need to have: Audio / Fn Switch #1 off:OFF on:ON on an IA button.

You should also test the pedal itself - if you take the plug out of the PBC's Function Switch jack, then take a piece of wire or a paper clip and manually short the tip to ground in the plug, does the pedal switch?
 
You must log in or register to reply here.
Back
Top