[solved] Making the GT follow preset switching on the Axe-Fx itself?

Alexander

Well-Known Member
@rjmmusic

Hi Ron,

It seems that the bidirectional communication doesn't include the ability to have the GT "follow" preset switching on the Axe-Fx itself.
In other words: If I switch to another preset on the Axe-Fx, the GT doesn't switch along.

I can make that happen by setting "MIDI Receive Channel" on the GT to the channel of the Axe-Fx, AND enabling "Send MIDI PC" on the Axe-Fx.
But that's not a recommended configuration IIRC.

Is there another "safe" way to force the GT to play along?
 
You should be able to do it by turning off Ignore Incoming PCs in the Devices tab.

I definitely don't recommend setting MIDI receive channel to the Axe-Fx channel, that potentially cause MIDI loops.
 
That's odd. What are all of your settings in the Devices tab? Is bidirectional communication working in general (effect block status, tuner, tempo flash, etc.)?
 
Error found and solved. "Send MIDI PC" (on Axe-Fx) now works. Strangely enough it didn't when I tested earlier this week.
 
Back
Top