A beta release of 4.2 is available. I wasn't originally going to make this a beta, but the changes turned out to be pretty significant. Best to label this as a beta, just in case.
Use this release with Axe-Fx firmware 1.16 beta 2 or later.
FEATURES
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
THIS IS BETA FIRMWARE AND WILL LIKELY HAVE BUGS!
- First, back up your settings to a flash drive or computer! If you go back to 4.1b1 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGT42B2.zip
Mac Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.2b2.dmg
PC Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.2b2.zip
Manual: http://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.0.pdf
Editor Manual: http://www.rjmmusic.com/wiki
Use this release with Axe-Fx firmware 1.16 beta 2 or later.
FEATURES
- "Poll State" setting for the Axe-Fx III makes the GT query the Axe-Fx's state periodically so that any changes in the Axe-Fx or Axe-Edit will show up on the GT. This will work for effect block bypass and channels. If you also have "Ignore Incoming PC" turned off, it will also track preset and scene changes from the Axe-Fx and Axe-Edit.
- Fixed broken Axe-Fx I and II support
- Fixed Remote Mode when using an Axe-Fx III
- Fixed double flashes when Calc Tempo From Flashes is active
- Allow non-Cycle buttons to properly sync with effect block channels
- (4.2 beta 2) Fixed problem with IA Cycle buttons
- In order to see the Poll State option in the Devices tab, you may need to set your device to a different type, like "Axe-Fx II", then set it back to "Axe-Fx III". You should only have to do this once.
- There is still an issue where Axe-Edit running might interfere with button presses on the GT - pressing effect buttons won't always register. This only happens for some people (including me!). I am working with Fractal on this. In the meantime, if you experience this problem, you will have to pause or quit Axe-Edit when using the GT.
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
THIS IS BETA FIRMWARE AND WILL LIKELY HAVE BUGS!
- First, back up your settings to a flash drive or computer! If you go back to 4.1b1 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGT42B2.zip
Mac Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.2b2.dmg
PC Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.2b2.zip
Manual: http://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.0.pdf
Editor Manual: http://www.rjmmusic.com/wiki
Last edited: