Banking Controls H9 AND Ventris

M

Mkuebbeler

Active Member
So I'm using the Device page feature Ron had uploaded. I've changed the devices to what I currently use. 2 H9s and a Ventris. H9 Core is on midi 1, H9 Max is on midi 2 and the Ventris is on midi 3.

In the image, when I try to bank with the H9 Core, it's also banking on the Ventris. I dont understand how since I dont even have that setup to bank presets. Anyone have ideas?H9 Bank 1.png H9 Bank 2.png
 
Diezel said:
Does the ventris have omni mode? If so, it could be enabled on the pedal.
Click to expand...

I don’t see anything like an Omni mode on the Ventris. This only happens when I bank with the H9 core. The H9 max only banks the max. Kind of strange how it only happens with 1 and not both.
 
It sounds like the Ventris and the H9 are set to the same MIDI channel. Put them all on different MIDI channels and it should fix it. This has to be done in the PBC settings and on the devices themselves.
 
You must log in or register to reply here.
Back
Top